Varieties of making rings from coins. How to make a coin ring with your own hands at home
Unique things always attract our views and interests. Today, you can make yourself special by wearing a ring made from a coin on your hand. You won’t find exactly the same one anywhere, so let’s learn how to make it yourself. It will take a lot of time, but it's worth it.
How to make a coin ring at home?
Before you start making a ring, you need to choose a good and beautiful coin. As a result, we will get a ring where the coin will be partially displayed, so the more beautiful it is, the better the ring will look. After we've picked up the coin, we can get started!
1.
Let's take a piece of steel to make a good support on the work surface. Next, put a coin on it and hold it in a vertical position. Now we need to take a spoon or a small hammer and start hitting the edge, all the while rotating the coin. You need to hit the coin evenly and the hits should be the same.
Here's what we'll get after a while:
This is the most difficult stage, it can take a lot of time.
Continue shaping until the ring fits your hand.
2. After the coin has received the desired size, the middle needs to be cut out. To do this, we use a drill and a metal drill. Before doing this, you can go over the outside of the ring with fine sandpaper.
We try to make the hole as large as possible.
So we got our result, a ring made from a simple coin!
You can also wear the ring yourself.
History of the idea
Once upon a time with the help silver coin and a hammer, designer Nicholas Heckman created a homemade ring for his girlfriend. No one expected it to turn out so well, and the relatives and the young lady herself were truly delighted with the work done. Subsequently, Heckman released a whole series of designer rings, which added to his fame and recognition. It happened that he had to suspend the sale of products because they were in amazing demand. to his practical guide Heckman shared it with the public and now everyone can become a home jeweler in a comfortable and convenient environment.
Tools for making a ring
Obviously, it is initially necessary to select a tool for making a hole in a coin; here the choice depends solely on ease of use and the manufacturer’s preferences, for example: a drill, a hammer (plastic) and a bolt - a completely standard set for this type of work. In order to give the coin ring shine and completeness, you will need a piece of sandpaper. It follows from this that in technically There shouldn’t be any difficulties in finding materials; everyone can act to the best of their ability and ingenuity.
Coin selection
In reality, the requirements for choosing a coin are not that extensive. There is a set of qualities that it must meet and be processed according to it to create a future product. First of all, it must be as durable as possible and not harmful to human life. In this case, brass, silver, bronze and steel are absolutely harmless. The color of the coin for the ring depends on individual preferences, but the size is a general indicator - coins with the equivalent of less than 1 ruble will not be suitable for work.
“Crazy hands” or “I myself”
When choosing a coin for a ring, pay attention to the choice of material; silver has a big advantage. The first step is to heat the coin until a bright red tint appears, but here it is important to find a middle ground and not overdo it, since the elements may suffer and the coin itself may take a shape that is not desirable for further work. At the end of this procedure, the coin must be immediately placed in cold water, a characteristic sound will be heard, but you should not be afraid of this, because this is considered an absolutely normal manifestation during such an interaction.
The next step in making a coin from a ring will be making a hole - this is a rather important moment, since it is important to monitor symmetry and thickness; the larger the hole, the correspondingly thinner the product. Then the hammer and bolt come into their own. For those who do not know what a bolt is, it is a tool for making chain links that visually looks like a rod that widens towards the bottom. The coin should be placed on the crossbar and be guided to the lower part with precise, neat blows of the hammer, increasing in width. This is a rather labor-intensive process that requires concentration and patience. You need to focus on the mark that is located on the crossbar and indicates the completion of the work. Why a plastic hammer? Because any other method increases the risk of damage to the product tenfold. There is one more subtlety that must be taken into account. To prevent the product from visually becoming similar to a cone, it must be periodically removed from the crossbar and placed on the reverse side.
Video option
Grinding process
Grinding a coin ring is the most enjoyable process in making such a product. When the desired shape appeared and the coin turned into a real work of art, all that remained was to bring the matter to mind and give the ring a marketable appearance. Sandpaper not only adds shine, but also smoothes the surface of the ring, after which it becomes smooth and pleasant to the touch.
There is one more secret how you can add extra smoothness to a coin ring. To do this, use a regular spoon, which is needed for light tapping on the surface of the ring. Here, again, it is important to be careful and careful, because any intervention with more force than necessary can ruin everything that can be done up to that moment.
Safety precautions
Anyone who is going to create a ring from a coin should understand that this is a rather dangerous process, 
which requires a certain approach and compliance with technical rules. The most important thing that a novice master should remember is safety glasses, which should not be removed at the entire stage of the work. A mask and specialized gloves are also important, since when interacting with heated metal, every mistake made can result in serious injury. The work area must also be appropriate to the occasion and protected from unwanted interference by production costs. All materials must be in sight, and the process itself must be carefully planned in advance. It should be remembered that when choosing a coin, preference is given to coins made of a soft alloy; they are more suitable for work and are appropriate for creating such a product.
Experience of professionals
In order to achieve maximum shine on a coin ring, sandpaper alone will not be enough and more experienced craftsmen suggest using an abrasive compound. This can be considered quite reasonable advice, since this composition is used to treat the surface of hard materials, be it metal or rocks.
In any case, only by mastering the initial techniques, you can create your own unique approach to making a ring and choose your own available tools that only you can masterfully handle.
Olga Novak
A coin ring will look very beautiful on a woman’s fingers. If everything is done correctly, it will be difficult to distinguish it from the salon one.
How to make a fashionable coin ring with your own hands?
For this you will need:
- vice;
- metal platform for an anvil;
- coin;
- drill;
- sandpaper;
- grinding and polishing tools;
- steel spoon.
Instructions for creating a coin ring:
- Place the coin on the anvil with its edge and attach the convex parts of the spoon to it. Then carefully go evenly along the entire edge of the coin, patting it lightly. This is how you check the shape of the workpiece;
- Using a drill, drill a small hole in the center. Install the drill bit once the end goes through the coin. Be careful, as soon as the ring gets hot, you may get burned;
- Take sandpaper and, turning on the drill, process the outer parts of the workpiece;
- Carry out final surface treatment. To do this, take a cloth, apply an abrasive compound to it and polish the surface. To get a mirror shine, repeat the treatment several times;
- Now clamp the coin in a vice, using cardboard pads to protect it from scratches;
- Enlarge the coin hole using a drill bit. This is quite painstaking work, as there is a possibility of damage to the coin. Everything must be done carefully, constantly checking the strength of the fastening;
- Using a power tool with a sanding roller, smooth the inside of the ring. After this, the edges will become quite sharp. Run a file along the edges of the piece on all sides at a 40-degree angle until they become more rounded. Using a polishing attachment, polish the inner surface of the ring and remove all roughness. The accessory is ready.
How to make a ring from a five-ruble coin?
To do this you will need:
- spoon;
- drill;
- five-ruble coin;
- hammer;
- compass;
- vice;
- drill.
Instructions for creating an accessory:
If you want to make thick jewelry, use a 5 ruble coin.
First, take something metal, for example, a hammer or just a piece of metal. Place the edge of a coin on top of it and, holding it with your fingers, hit the edge with a heavy spoon. This will take a long time, so be patient. This is the only way you can understand how to make a ring out of a coin and whether it’s worth it.
Do this work about 3 times, then turn the metal and start working again. In this case, the main thing is to knock often, but not hard, so that the surface expands gradually from impacts and is smooth.
Strong shocks contribute to the appearance of dents.
Knock until the nickel reaches the desired size. After this, start measuring the diameter with a compass to maintain accurate parameters.
It's time to drill. First, secure the nickel in a vice to avoid scratching the surface. After this, insert the ring between them so that through their opening there is access to the coin. Having fixed and held the structure well, drill the part.
Now widen the hole. To do this, without removing the magnetic ring from the clamp, you need to expand it using a drill or round file of a suitable diameter. Sand the outside first. Take a bolt and nut of the desired size and diameter, similar to the inner circumference of the jewelry. Place a thick piece of fabric over the bolt and secure with a nut.
It is important that the ring does not come into contact with the metal, otherwise it will be scratched. Clamp the bolt in the drill, turn it on and sand the ring first with fine sandpaper, then with a thick cloth. The inside can be easily polished by inserting a straight piece of shelf into a drill instead of a drill. Hold the ring with pliers and wrap it with thick cloth.
That's all, the ring is made, all you have to do is wipe it well with your hands, and the fashion accessory is ready.
We make a coin ring with our own hands using a crossbar
If you are wondering how to make a coin ring without a drill, try this option. First you need to decide what you will make the ring from. Silver is considered an excellent material. First, heat the coin until red hot so that it becomes elastic, but do not overdo it, otherwise the material will begin to deform and some of the elements will be smeared. As soon as the penny has acquired a reddish tint and turned slightly white, immediately lower it into cold water.
Nowadays various unusual jewelry is in fashion. Things made with high quality by hand emphasize the uniqueness of their owner. We invite you to get acquainted with a master class on how to make a ring from an ordinary coin.
When making a coin ring, it is very important to first choose the right coin.
When selecting a coin, pay attention to the following parameters:
- safety;
- strength;
- color;
- size.
Coin rings made from materials such as silver, brass, steel, and bronze are not dangerous. You must be careful with coins containing nickel and copper, as they can cause skin diseases, allergies and poisoning of the body.
The colors of the coins are bronze-yellow and silver-steel. Bronze-yellow coins include Russian 10 and 50 kopecks, 1, 5, 10 and 50 rubles and Ukrainian 25 and 50 kopecks, 1 and 2 hryvnia.
You need to pay attention to the size of the coin, since a small coin cannot be used to make a large diameter ring. Regardless of the year of issue in Russia, coins of the following sizes: small - with a denomination of up to 1 ruble, medium - from 1 to 10 rubles; large ones - 5, 10, 20, 25, 50 and 100 rubles. In Ukraine, the size of coins in ascending order is as follows: the smallest are 1, 2 and 10 kopecks, then 25 and 50 kopecks, the largest are 5 kopecks, 1, 2 and 5 hryvnia.
For example, 50 kopecks of the USSR before 1931 are made of silver, the American Sacagawea dollar is made of a bronze alloy and is good for making rings with a large diameter, some EU coins are made of bronze alloys and of various sizes.
DIY coin ring: master class
You will need:
- coin;
- vice;
- power tools with attachments for grinding and polishing;
- drill;
- steel spoon;
- a metal platform that acts as an anvil;
- fine-grained sandpaper.
- We place the coin on the “anvil” edge-on, apply a spoon to it with the convex part and apply gentle blows evenly along the entire edge of the coin. We periodically check the shape of the workpiece.
- We stop when the edge of the coin becomes the width required for our ring.
- Using a nail or pointed object, mark the center of the coin.
- We drill a small hole in the center of the coin with a drill, stopping the drill as soon as its end passes through the coin. The drill will jam in the metal, allowing us to complete the next step. Be careful as the ring becomes hot when drilling and you may get burned.
- We take coarse sandpaper, and, turning on the drill so that the coin on the drill rotates, we process the outer parts of the ring blank. Then we take fine-grained sandpaper and repeat the processing.
- We carry out final processing of the outer surface. To do this, take a cloth, apply an abrasive compound and polish the surface with it. To obtain a mirror shine, we repeat this treatment several times.
- We clamp the coin in a vice, using pads in the form of cardboard or paper to protect it from scratches and dents.
- We enlarge the hole in the coin using a drill or other device. This is the most difficult and painstaking stage of the work, as there is a possibility of ruining the coin. Everything must be done carefully, slowly, periodically checking the fastening of the coin.
- Using a power tool with a sanding roller, smooth out the inside of the ring. After this stage, the edges of the product will become quite sharp.
- Using a file, we pass along the edges of the product on all sides at an angle of 45 degrees until they become more rounded.
- Using a polishing attachment with a small amount of abrasive material, we polish the inner surface of the product, removing all remaining roughness.
Our homemade coin ring is ready.
