Total War Britannia errors and solutions. Lags, crashes, brakes, freezes, freezes and low fps in Middle-earth: Shadow of War - ways to solve War crashes

Lovers popular game Dawn of War sooner or later they encounter various kinds of problems that can arise both when installing the game and during gameplay. If you have Dawn game of War does not install, does not start, or freezes, slows down, or a black screen appears, and other problems arise during the game, in particular, Dawn of War does not save, controls do not work or there is no sound in the game, in this article we will detail Let's look at the main causes of problems and errors, as well as ways to eliminate them.

Dawn of War won't install

Dawn of War System Requirements

Before installing Dawn of War on your computer, you should check the system requirements provided by the game developers. Remember that for the game to work correctly, at least the minimum requirements must be met. However, in some cases, even minimal settings may not be enough. In this case, you will either have to abandon the game or increase the performance of your computer.

	Minimum	Featured
OS:	Windows 98/2000	Windows XP
CPU:	Intel Pentium 3 1.40 GHz	Intel Pentium 3 1.40 GHz
Video card:	64Mb	128Mb
RAM:	256Mb	512Mb
Free disk space:	2Gb	2Gb

Of course, we won’t throw away the game, but we will work on the preliminary settings. In this regard, we will check our PC for compliance with the simplest requirements. So if Dawn of War won't install, let's see if there is enough free space on your hard drive to install the game. The distribution requires free disk space, so a few gigabytes of extra space will not hurt. Also, it should be kept in mind that various games require a significant amount of free space, up to 100 GB and above.

Dawn of War installation is blocked by antivirus program

Often, antivirus programs, in the fight against viruses, protecting our computer from external threats, for security purposes they block numerous processes performed by the operating system. Sometimes such security is so strong that the antivirus begins to block access not only to viruses, but also suspends some normal processes, perhaps by mistake, considering them potentially vulnerable. Hence the conclusion: disable your antivirus while installing Dawn of War.

Cleaning your computer and rebooting

Sometimes, a simple system reboot can immediately solve many problems that arise both during the installation of games and their subsequent operation. The same applies to various programs and applications. There are many reasons, as already mentioned: the computer is filled with various kinds of garbage, including an overflow of the system cache, the maximum permissible number of simultaneously running processes, among which, perhaps, some are frozen and are not running, but the load on the system is not bad at all. In this case, .

Internet access

During the installation process, some game clients require access to the Internet, providing access to the installation or update server. In this case, it is necessary make sure the Internet is working.

Dawn of War won't launch

Before you look for reasons why Dawn of War won't launch, you need to make sure that the installation of the game itself was successful. Otherwise, if during the installation process on the computer any failures or errors were observed, but at the same time the game was installed, it is still impossible to guarantee the subsequent launch and operation of the game with maximum accuracy. If the game starts, you're lucky. However, what will happen next is unknown.

Reinstalling the game

Surely, many gamers have encountered a situation or, as you might call it, a cause or effect associated with reinstalling a game. That is, if the game installed normally, but does not want to start, reinstalling it can fix the problem. It is unknown what this is connected with, perhaps the antivirus or firewall “ate” some files or something else during installation, but after installing the game again, it becomes fully functional. Thus, delete the game and install it again, paying attention to every detail of the installation. Perhaps at some point the installation program will ask for some files, etc.

Searching for information by error text

Another option, it is not described in this article, but as a little secret that everyone knows about, we will add that an error when starting Dawn of War is usually accompanied by a corresponding system message. So, in this case, it would be true enter the text of such an error in the search, as a result of which you will receive the most detailed answer, and, moreover, concerning this specific error. This is how you will accurately determine the cause and, as a result, find a solution.

Computer news, reviews, computer problem solving, computer games, drivers and devices and others computer programs." title="programs, drivers, problems with the computer, games" target="_blank"> !}

Running Dawn of War as administrator

As an alternative, you can run the game as an administrator. That is, in our case, so that run Dawn of War as administrator, you must press right click mouse on the game shortcut and select Run as administrator. If this method helps solve the problem so that the error does not occur later, set run as administrator by default for this game. To do this, open the Shortcut Properties, in the Compatibility tab, check the box Run this program as administrator.

Game compatibility issue

Another obstacle to launching Dawn of War may be the game's incompatibility with your operating system. In this case, still there, in the Shortcut Properties, you need to add a checkbox Run the program in compatibility mode for:, and select the desired OS from the drop-down list.

Availability of .NET Framework libraries

Also, a very serious problem with running Dawn of War is the lack of the .NET Framework library installed on the computer, which ensures the launch and maintains the functionality of almost all programs and applications, including games. This is a prerequisite and Microsoft. NET Framework must be installed. At the same time, you should keep in mind that there are different versions of the .NET Framework library, and therefore the presence of one of them on your computer cannot sufficiently guarantee the correct operation of the game.

Availability of DirectX

And, of course, perhaps the most important condition, a requirement that is necessary for absolutely all games, including Dawn of War, installed DirectX. Without it, no game will work. Currently, almost all distributions that in one way or another require DirectX installed already include this set. Typically, DirectX is automatically installed with the game. However, if it is missing, you need to download and install it. It is not necessary to do this before installing the game, you can do it after installation, but installing DirectX on your computer is a must.

Dawn of War freezes

Video card problem in Dawn of War

The reason why many computer games freeze, including Dawn of War, is the video card, its incompatibility minimum requirements. For gamers, the video card is the main tool, the main success or disappointment. If your weak video card, then no updates, no drivers, and the like will help you. To achieve maximum effect and enjoy the game, A reasonable remedy would be to think about purchasing a more modern, stronger video card. The downside of this method can be a significant financial investment, since high-quality graphics and gaming at maximum settings are not cheap, and buying a good video card can cost a pretty penny.

Installing and updating the video card driver

But don't despair. In order for the game to run more or less well on the computer, you can solve the problem even with a regular average video card; you can configure it, and also check all the necessary computer parameters to ensure a comfortable game. If your video card is more or less modern, then It is mandatory to have the latest drivers. Fortunately, you can download and install them completely free of charge from the manufacturer’s official website. After installing the drivers, as a rule, if you have an AMD or nVidia video card, then special software is downloaded along with them, which is installed on the computer, and thanks to which you can control various game settings.

Dawn of War slows down

Let's return to the problems described above, related, so to speak, to poor installation of the game. If there were any problems, it is quite possible that the game will often cause slowdowns, lags and other errors in the future.

Dawn of War slows down due to unnecessary processes

If the game Dawn of War slows down, you can also check the load operating system. Any game itself requires significant resources to play and work correctly. Dawn of War is no exception. If at the moment, in addition to the game, other processes are running on the system, you need to check them and determine how important they are at the moment. As a quick solution, close all unnecessary processes and leave only the most necessary ones. The main thing here is not to overdo it, otherwise you can close everything in the world so that the computer itself simply stops.

Computer news, reviews, solutions to problems with the computer, computer games, drivers and devices and other computer programs." title="programs, drivers, problems with the computer, games" target="_blank">Компьютерная помощь, драйверы, программы, игры!}

Dawn of War slows down due to weak internet

Another point is Internet access. If the game requires good high-speed Internet, then of course the problem is obvious and, in principle, understandable. Therefore, it is worth thinking about purchasing a more powerful tariff. But there are situations when even with good internet, Dawn of War is slow. For example, in certain moment an application has started updating on the computer, let’s say, not to mention if movies are downloaded along with the game. Or maybe you watched a video, for example about Dawn walkthrough of War, and played the game at the same time!? Thus, anything will slow down here. Decide one thing: either a movie or a game. And if you need both, then at a minimum the computer must have "thermonuclear" properties. Do you understand what we mean!?

Dawn of War how to increase fps

Setting up graphics in Dawn of War

High fps or fps is something that is so often lacking in the game. If you are one of such users, then Using maximum graphic settings can greatly affect the FPS of the game and cause various lags, slowdowns, and freezes. On the other hand, If you lower the graphics settings as much as possible, you can significantly increase FPS. By the way, you can control graphics settings not only in the game itself, but also in the software of your video card.

Video card overclocking tools

To significantly increase fps Dawn of War Many users use overclocking tools. There are a lot of them on the Internet and finding them is not difficult. For example, to accelerate nVidia video card, you can use the MSI Afterburner utility.

Low FPS due to overheating

Low FPS in Dawn of War maybe because of CPU overheating, and the video card itself. The above remedies can eliminate this problem, thanks to which you can, for example, set the cooler speed to maximum.

Dawn of War black screen

If it happened that Dawn of War gives a black screen, there is a problem, again, with the video card. Check the availability of drivers, namely, whether they are the latest ones. If the manufacturer has produced more than new version, don’t be lazy to waste time - update your video card driver.

Dawn of War crashes

If the game Dawn of War crashes to desktop, in this case it is worth checking the correct installation of both the game itself and updates, patches, etc. Perhaps the previous update itself contains certain errors. There is little that depends on the gamer; all questions are up to the game developers. If it is possible to reinstall the received updates, do so. In the worst case, reinstall the game itself.

Dawn of War won't save

Probably the most common reason why Dawn of War won't save, is incorrect path to save game. What does it mean? This means only one thing - many games refuse to work with Cyrillic. If the folder on your computer with game saves has Cyrillic characters in its path, then perhaps Dawn of War will give an error when saving. Simply put, use the path to the Dawn of War save folder, only in Latin, without Russian words.

Most problems with saving Dawn of War occur due to the game's incompatibility with the operating system. This fact is most inherent in the Windows 7 operating system, but perhaps also in others.

Dawn of War controls not working

Keyboard or joystick problem

If in Dawn of War controls not working, there are many reasons. For example, if the control buttons do not respond at all, there may be a problem with the controller or keyboard. Check the connection and, if necessary, restart the device. Sometimes, a game restart is required to complete this procedure.

Sticky keys in game

Often, problems with controlling Dawn of War can occur due to sticky keys. When several buttons are pressed simultaneously, the system reacts to this in a unique way. What conclusion can be drawn from this? - use joysticks to play.

Incorrect control settings

At the same time, the problem with the controls may lie in the control settings of Dawn of War. Carefully check the control keys and, if necessary, replace them with the ones you need.

Incorrect keyboard layout

Alternatively, you can change keyboard layout. You can do this with a keyboard shortcut Shift + Alt. The fact is that For some reason, controls in some games only work on the English keyboard or vice versa. Experiment.

Dawn of War no sound

Adjusting Volume Settings

There is one interesting point: if at all, it is understandable, but there are situations when the sound on the computer works, but, for example, in some application, for example in a browser or game, there is no sound. The thing is that in the settings sound card The appropriate parameters have not been set. Simply put, if in Dawn of War no sound, necessary Open Volume Options and check all available settings, paying special attention to our game.

Adjusting sound in Dawn of War

If there is no such application in the volume settings, but there is still no sound in Dawn of War, go to the settings of the game itself. Most likely, the main audio device has been disabled or changed somewhere. And further. Very often, and occurs in almost everyone - The game's sound settings have gone wrong or playback devices not defined. In order to solve the problem, restart the game, and if there is a desire and a little time, for greater confidence, restart the system. In many cases this method helps.

These are some of the things you can do and look out for when you're having problems with Dawn of War. Perhaps something was left unsaid, something was said wrong. If you have any questions about the game, please ask them in the comments. Or, if you have already encountered various kinds of problems and were able to solve them, please share. Perhaps someone is having a similar problem right now, and your solution will help fix the situation. Good luck and have a good game!

Ready for the Battle of Britain? Creative Assembly has created another saga for us and, as always, upset us with its standard problems. Total's main mistake War Britannia lies in the lack of general testing. The game does not start for 15% of users who just left a review on Steam and wrote on the game forum.

Let's look at the main problems and try the solutions that developers and other players recommend to us.

Total War Britannia won't install

Unfortunately, the game installer leaves much to be desired. Some users began to complain that when installing the game, an error occurred that a certain file was missing. The fact is that the standard installer is designed to ensure that you correctly follow the file saving paths and have enough space on your hard drive. Let's check the list below to see if everything is in order for correct installation.

1. Check the amount of free space on your hard drive. This is the first thing you should pay attention to. During the process, the installer creates temporary files that will be used to unpack the archive.
2. Pay attention to the names of the folders. This is an important point, because The installer works correctly only with Latin names. If you see Russian letters on the path, remove them or install them in another folder.
3. Disable your antivirus during installation. Some files may be recognized by the antivirus as malicious. Even vaunted Denuvo protection sometimes defined as unsafe. This is because it modifies files to protect them.
4. If you are installing from an .iso image or downloaded Total War Britannia via torrent, be sure to move the files to the disk in which you will install it.
5. Sometimes files are installed into broken clusters of your hard drive. This is due to the fact that the system has not yet recognized bad sectors on the HDD. You need to check the disk or defragment it.

Total War Britannia won't launch

If during the startup process you get a black screen or even see a splash screen, this means that the processing of the game’s file structure was successful. If an error occurs during startup, then let’s try to figure out the reason for the occurrence and try to determine what’s wrong by the name.

The following steps allow us to perform a basic fault diagnosis procedure and solve 80% of all incoming problems.

1. If nothing happens on startup. Those. Clicking and opening the shortcut does not cause loading, then most likely your drivers are not updated. The fact is that before releasing the game, developers send nVidia and Radeon special data that allows them to optimize the application. Try updating the drivers for your video card.
2. The window opens and closes immediately. This means that you may not have enough RAM to run it. Check your free RAM and close unnecessary programs to free up space.
3. You see the splash screen and the “Not responding” error appears. During the screensaver, temporary files are loaded into your RAM, which are responsible for starting, apparently the problem arose in them. As described above, try closing unnecessary applications.

Total War Britannia error 0xc000007b

This problem is widely known and is associated with the fact that the system cannot find the handler for .dll files that are located in the game folder.

In Total War, if this message appears on your screen, then most likely your registry structure is broken. You just need to reinstall the game.

The fact is that during the first launch, a conflict may have occurred that changed the standard registry values, and the next time it was started, the so-called “Safe Mode” inclusion was recorded in it. This function disables many graphics options and launches with minimal settings. Usually this helps and subsequent startup is successful.

Game won't save

Game save files are located in two places. If everything is correct, then the game will save files in My Documents/SEGA/Total War Britannia. For the correct operation and processing of these files, it is imperative that the folder be indexed. This can be done through Folder Options.

The fact is that this function will make this folder visible to the rights and permissions of the game. With incomplete access, processes request access to make changes, although their rights are limited to read only.

One of the important points is disabling User Account Control. Once again, game rights will be restricted until this Windows feature is turned off. If you do everything correctly, the game will start saving correctly.

Total War Britannia crashes

Some players began to complain that during the game or at the moment when the enemy is making a move, and you are just waiting, the game may simply crash and close. This is not always accompanied by a window with a text notification of the problem.

Let's try to figure out why Total War crashes and closes.

1. When playing, your GPU (graphics processor) may simply overheat. This can be a problem for computers that have not been cleaned for a long time and tons of dust accumulated on your video card create overheating. This phenomenon is also often observed among laptop users.
2. Error reading from RAM. While the game is running, the processor reads information from the hard drive and transfers it to RAM for processing. If he places it in the wrong sector, then it simply will not be read. Recommends diagnosing memory integrity using basic methods.
3. Temporary files while the game was running were moved to damaged hard drive clusters. This phenomenon is mainly typical for HDDs that have been in use for more than 4-5 years. Check it for bad sectors.
4. Your antivirus could be found in the next processed dll file, suspicious or unwanted activities. How " good man", instead of giving you a warning, it simply closes the game. Typically, this phenomenon can occur if you downloaded a repack from an unknown packer, and not, for example, Mechanics.

Total War Britannia freezes

The application may stop working completely due to some problems, which are often associated with overheating of the central processor or HDD malfunctions.

First of all, be sure to check your CPU temperature while playing. If it exceeds 80-85 degrees, then you just need to clean it from dust and change the thermal paste. By ignoring these recommendations, you can not only be left with these problems, but also completely ruin your processor.

Total War Britannia is slow. Low FPS

Yes, you are not alone. In fact, complaints about optimization come in regularly. At the time of this article's publication, this is largely the reason for the "Mixed" reviews on Steam.

Developers are already releasing patches that allow you to play comfortably, but at the moment, if FPS drops, you can take the following measures:

1. Check CPU and GPU temperatures. As we know, a deviation from the norm of 5-10 degrees is the main problem when you experience lags. Let's imagine that +5 degrees is +5% to lag in the game. Those. if your PC overheats by 30 degrees, then get -30% to the stability of operation.
2. Close background processes that are running while playing. This will allow you to discover what is preventing the application from working correctly.
3. Antivirus can scan files while you play. It is recommended to set it to “In Game” mode.

Total War Britannia no sound

Sound problems are mainly the result of a faulty sound card. At the moment, all games are equipped with special audio data processors, which are no longer played as before from mp3 files. Now these are completely stable and established programs.

Tolkien fans are rejoicing, because the action role-playing game Middle-earth: Shadow of War has finally been released, which tells new story about what happened before legendary War Rings. However, the joy of fans did not last long, because many errors and bugs were discovered in the game, so the official forums were instantly filled with topics that Middle-earth: Shadow of War lags, slows down, freezes, crashes, freezes and does not want to start. Fortunately, many of these problems can be solved and we will tell you how to do it.

However, before cursing the developers and wishing for them a separate cauldron in hell, we advise you to check the parameters of your PC, or rather, their compliance with the minimum “systems”:

• Operating system: Windows 7 with SP1 update
• CPU: Intel Core i5-2300 or AMD equivalent
• RAM: 6 gigabytes
• Graphics adapter: NVIDIA GeForce GTX 660 or equivalent from Radeon
• Winchester: 70 gigabytes of free space

In addition, you should definitely update the drivers for your video card, because accelerator manufacturers often release new versions of “firewood” before the release of gaming blockbusters. You can download them for NVIDIA, and for Radeon -. However, you should not download beta versions of new drivers, as they may contain many bugs.

You may also need additional software to run Shadow of War. It's about about the latest version of DirectX, as well as Microsoft Visual C++ and Microsoft .Net Frameworks. All of them can be downloaded from the official portal of the American corporation.

Can't launch Middle-earth: Shadow of War

Most often, difficulties with launching this game arise due to its incorrect installation, so the first thing you should do is check its cache on Steam. To do this, go to the Library, right-click on the action name and select the “Properties” option. In the new menu, find the option to check file integrity. If you have a non-Steam version installed, then only removing it and reinstalling it will help.

Some also note that this problem can be solved by deleting the Shadow of War folder from the Documents/WB Games directory. You should also make sure that the path to the game folder does not have Cyrillic characters.

You can try running the game as Administrator by right-clicking on the .exe file, or in compatibility mode with other OSes.

Crashes with error Direct3D 10.0 API is not available

1. Go to the game directory and find the CommonRedist folder. Then go to DirectX and install it.
2. Next, download and install the update for your Windows operating system - KB2670838

Crashes with error Direct3D 11.1 API is not available

In this case you need to do the following:

1. Download and install the update for your Windows operating system - KB2670838. You can download it from the official Microsoft website.
2. Then launch OS Update and start searching for updates. Then click on the highlighted inscriptions to open the list of updates. In the Important section, disable all updates, and in the Optional tab, disable all language-related updates. The rest should be left. Install updates, and then restart your PC.

Now the error should disappear. If it remains, then try installing Internet Explorer 11 on your computer. Sometimes this helps.

Crashes with the error “The video card does not support DirectX 11”

This bug usually occurs when playing on a laptop. In this case, you need to do the following:

1. Go to Device Manager and select the Video Adapters tab. Then click on your video card and disable it.
2. Log in to the game.
3. Minimize Shadow of War and then re-enable the graphics card you previously disabled.
4. Return to the game again and select a discrete video card in the options. Confirm your choice.
5. Then select your game graphics adapter and confirm its use.
6. Re-enter Shadow of War.

If strong brakes begin and the image ripples, then repeat the 4th and 5th steps until these phenomena disappear.

Low fps, freezes, freezes, stutters and lags in Middle-earth: Shadow War

If you have installed a new driver and your hardware meets the minimum system requirements, then you should first check the system load in the task manager. It is possible that you have several programs running in the background that are “eating up” your computer’s precious resources. Be sure to exit your browser before launching the game as it consumes a lot of RAM.

It is possible that the game is trying to use the built-in video card instead of a discrete one. You can fix this problem in the NVIDIA control panel (analogue from Radeon).

Shadow of War continues to slow down and lag? In this case, it is worth lowering some graphic options. Start by lowering anti-aliasing and textures. It is also worth disabling the setting that is responsible for post-processing. In the future, players will probably find a way to optimize graphics using a configuration file. In this case, we will definitely add it to this article.

Middle-earth: Shadow of War keeps crashing

As a rule, this occurs due to overheating of certain components that cannot cope with the load. If the game not only crashes, but also causes the computer to overload, then it is absolutely overheating. In this case, only reducing graphics settings, improving ventilation in the PC, or changing components can help.

It's also worth checking for updates. It is possible that he came out for the game new patch and without it, it now immediately crashes to the desktop.

Black screen appears in Middle-earth: Shadow of War

This problem usually appears due to the video card. It must be powerful enough to run this game. However, this is often a bug of Shadow of War itself, which is short-term in nature. To get rid of it, you should switch to another window using the Alt+Tab key combination, and then click on the game window again.

Total War: Warhammer was well received and appreciated by players around the world. She won the hearts of millions! But such a powerful application is perceived differently by computers. One of common problems An issue related to this game is a crash when loading a campaign or battle. Today we will tell you what you should do first to fix the problem.

Reasons for crashes from the game

According to statistics, this phenomenon is most often associated with inappropriate components. In particular, weak video cards are simply not able to withstand such a load. In addition, the importance of updating this particular equipment is difficult to overestimate. Outdated drivers can also cause crashes. What else could lead to a similar situation:

• antivirus operation;
• Cyrillic characters in the directory path;
• problems when creating a shortcut on the desktop;
• Lack of DirectX or Visual C++ 2010.

How to fix the problem

Let's try to quickly solve all the existing problems. Next, we will show you which parameters should be checked first. Let's start with the simplest steps.

1. Cleaning temporary files using special utilities and correcting registry keys, having previously created a backup copy of the entries. For this CCleaner to help.
2. Manually download and install latest version video card drivers from the manufacturer's official website (this is important!).
3. Download and install DirectX and Visual C++ 2010 from the official website. They may be in the installation image of the game.
4. Let's reboot.

So, now we have everything we need for the game to function properly. Disable antivirus and firewall. Let's try to play. Flight again? Then we try to launch the game not through a shortcut on the desktop, but from the folder where it is located.

If the result remains the same, then configure the application compatibility and run as administrator:

1. Right-click on the executive file and select "Properties".
2. Go to the section "Compatibility" and here we select our operating system.
3. Place a checkmark at the bottom so that it opens further from Administrator.
4. We configure similar settings for all users by clicking the button below. Applying the changes.

Setting up the game

Conclusion

All of the above should help get rid of crashes, but if this does not happen, then either the computer is weak and Total game War: Warhammer will crash whether it is a battle or a company. The last option is an error in the game itself, which will be eliminated with updates and patches - in this case you will not be able to fix the error yourself. If you still have useful information, or comments - write in the comments