Do I need to cut my sim card for iphone 5s. How to cut a SIM card for iPhone: a universal template and instructions

If you become the owner of a new iPhone, then the first thing you need to do to use communication services is to set up the gadget and install the SIM. And here it is worth considering that different models of apple devices use cards of different formats, and the one that was in the old phone may not fit in size. Today we will tell you what SIM formats are used, how to cut a SIM card for iPhone, and whether it is possible to cut a card at home to micro format for iPhone 4 or 4 S, and to nano for iPhone 5, 5S and newer models.

What sims are used

Depending on the generation of the apple gadget, they use sim cards of different formats. Like devices from other manufacturers, iPhones have gone through the entire evolution of SIM cards, with the difference that Apple was the first to start using micro and nano SIM cards in their devices.

Today it is no longer a problem to get a new SIM card for an iPhone 4S, or 5S, instead of cutting it in a workshop or at home. This can be done by contacting the office of your operator, and get the required SIM card format for free.

Getting a new sim has undeniable benefits. It will work fully without any restrictions. The fact is that old SIM cards may not support new communication technologies, unlike new ones. Also, the subscriber, receiving a new card, retains his number, tariff, services, money on the account.

If you decide to cut the SIM card for iPhone 4s, 5s, or any other
later model, it should be borne in mind that how to properly cut a SIM card of the desired format from a regular one depends on its performance. If you make a mistake, then it will become impossible to use the card, and you will need to get a new one from the operator.

If possible difficulties with a SIM card do not scare you, and you decide to cut a SIM card for iPhone 5, 5S, 6S, or any other iPhone, then we will tell you how to cut the SIM correctly and reduce it to the desired size. In addition to self-cutting, you can use the services of craftsmen who use special staplers for this. This allows you to get a SIM card of the desired format without the risk of getting a non-working card.

In order not to be mistaken with the size, you need to know what format is needed. So, for iPhone 4 and 4s, you need to cut the SIM card to micro format, and for iPhone 5/5 S, and newer models, you need to cut the SIM card to nano size.

How to cut your own sim

Cutting a SIM card for an iPhone of the right size is not as difficult as it might seem, but keep in mind that this requires almost jewelry work. With one wrong action, the SIM card will become unrecoverable. Therefore, in order to properly cut a SIM card for an iPhone, you can watch a video on the Internet, as others do.

For work, you will need sharp household scissors, a ruler, and a nail file (suitable for nails), a sharp knife or pencil. When using any instructions on how to cut a SIM card for iPhone 4s, or iPhone 5 S of any operator (MTS, Beeline, Tele2, MegaFon), you act at your own peril and risk, since any instructions do not guarantee that you can cut a SIM card correctly at home.

One of the options on how to cut a SIM card for iPhone is to use a template that has nano sim dimensions (for iPhone 5, 5S, and higher), or what a micro SIM card looks like (for 4 and 4S), in order to properly cut off the excess area plastic. To do this, you can download a file on the Internet with a size that you need to print on an A4 sheet, or use plastic from a SIM card of the desired format. In the latter case, you can find it with friends who have a new SIM card, or changed the SIM from the operator without daring to cut the SIM card for the iPhone on their own.

More difficult is cropping without a template using a ruler, and we will consider the option of obtaining a micro sim from a mini card (for iPhone 4 and 4S). To do this, place the sim metal chip towards you. Using a ruler, mark out 1.5-2 millimeters from the top, right and bottom. On the left, you will need to cut back from the rank by 0.5 millimeters.

After that, it is necessary to make a key on the SIM by cutting off the lower right corner at an angle of 45 degrees, stepping back two millimeters from the edge. After marking, you can cut off the unnecessary part of the plastic. Try to cut as little as you can, as you can file off the excess plastic with a nail file. If you cut off the excess, then glue it back will not work. Now you can try to insert the SIM card into the phone.

If you need to cut a SIM card for iPhone 5 and higher, then the task is simpler, since the plastic edging is cut off almost completely from three sides - left, bottom, and top. After that, you need to measure twelve millimeters in the length of the SIM card with a ruler, apply markings and cut off the right side of the chip. You also need to cut the key at a 45 degree angle in the lower right corner. After trimming, you may need to fit a new sim to the phone tray. To do this, use a nail file to sharpen the corners a little.

Results

Cutting a SIM card for an iPhone on your own is not difficult, but special attention is required. The main problem arises when a sim is cut off in violation of the sides - instead of the lower right corner, the key ends up in the upper left. Today, you can not only find a video with instructions on the Internet, but also print templates with which you can easily cut the card to the desired size.

We, in turn, recommend contacting the operator's office and getting a new sim for free in a few minutes. This will ensure that the number will work properly without failure, because even if you cut the sim correctly, you can damage its chip. Also, the subscriber receives a modern SIM card from the operator, with which a new generation of high-speed Internet will be available.

Every year, mobile technology improves, smartphones get bigger, and details get smaller. Manufacturers strive for minimalism of details and maximalism of displays. The changes also affected SIM cards, which have undergone changes since their inception. Today we will tell you how to properly cut a SIM card, adapting it to a new device. But first, let's study existing species sim cards.

Types of SIM Cards

Have you ever wondered why SIM cards are sold embedded in a large plastic base. Let's reveal a secret to you - once it was a SIM card! Yes, so big and uncomfortable, but the phones at that time were not quite small. Then it was considered an achievement that the phone can work without a wire, and few people were interested in the size of the card, thanks to which you can make calls.

Time passed, devices changed, large SIM cards were replaced by mini-SIM cards, which today we are accustomed to consider ordinary. Further - less. Mini-sims have already become less and less common, and micro-sims have begun to be used in new devices. And, it would seem, much less? But then Apple decided to reduce the cards for their devices - and nano-sim appeared.

If you decide to purchase a new SIM card today, when you open the package, you will find a card with several cuts. It is worth choosing the required size of the SIM card - and pressing in the right place - and you have a card suitable for your device in your hands. And if you want to rearrange it to another device, just save the remaining parts - and use them as an adapter.

cutting sim card

But what to do if you have an old-style card (mini-sim)? Then regular pruning can come to your rescue. But the question arises, how to cut a SIM card? There are several ways to transform a map into a new format:

1. contact the communication center. As a rule, they have special devices - SIM card cutters. For a fee or without it (as you're lucky), they will help you solve this issue - and adapt the SIM to your device.
2. crop the card yourself.

We cut the SIM card with our own hands

Let's consider the second method in more detail and talk about how to cut a SIM card at home. To carry out the task, you must have a pencil, ruler and sharp scissors at hand. For subsequent size adjustments, sandpaper may also be needed, since cutting off small parts is not very convenient.

First you need to decide on the size of the map that you want to get at the output. If you need to cut a SIM card under a micro sim, then its dimensions should be 1.5 * 1.2 cm, if under a nano sim, then you should have a rectangle with sides of 1.23 cm and 0.88 cm. After that once you have decided on the dimensions, it is worth drawing the outlines of the future SIM card on your source card. And only after that, carefully, without touching the chip, cut the card.

If the first fitting was not successful, and the SIM card turned out to be slightly larger than necessary, continue trimming. If only a few millimeters are left to remove, it is better to use sandpaper. The most important thing is not to touch the contacts during processing, since if they are damaged, the card will simply stop working. Trimming under the Nano Sim is much more difficult than under the Micro Sim, since there is much less plastic around the chip, and therefore it is much easier to hit the important part. Therefore, be careful and do everything without haste.
When the trimming is completed, you can safely insert your SIM card into the device - and use it.

If you need to install a smaller card in a device designed for a larger SIM, you can use a special adapter.

We hope our tips are helpful to you. And congratulations on your new smartphone!

In this article, we will tell you about how to cut a SIM card to the nano SIM size required by the new iPhone 6.

To get started, you need a regular SIM or micro sim. It will be nice if you have an old SIM card on which you can practice cutting. So, there is a sim, now we need scissors. It will be good to use ordinary paper scissors - no more, no less. And actually now we need a sketch of the size by which we will check the sizes. If you already have an iPhone 6, then the nano-Sim tray itself will easily go for the sketch. If not, then things are a little worse. It is desirable, of course, to find a device where one could measure the size live, but if this is not possible, cut off a piece of sheet the size of a nano-SIM (12.3 mm by 8.8 mm).

SIM card cutting process

First you need to determine how much to cut off so that there is a margin of a couple of millimeters on the top and side of the card, and then cut a little bit on each side.

The cut corner should be on the same corner as the "large" card. It is important not to lose it during cutting, as it is important not to confuse the bottom with the top.

As a result, you should get a card with almost only one metallic coating on the contact side.

Sometimes you come across ordinary mini-SIMs with an enlarged metal surface, which is larger than the nano-SIM itself. In such cases, it is necessary to cut the metal a little (don't worry, the card will work, since the chip itself is in the center). Trim a little bit on each side where the card is larger than the reference size applied until you get the right size.

In no case should the card dangle in its tray, but should fit quite snugly against the inner edges of the tray. To achieve this, you need to cut off very, very small strips from the sides of the experimental SIM card.

When the card is ready in length and width and will fit perfectly in the tray - do not rush to check and put it in the iPhone 6. regular cards are thicker than nano SIM, so arm yourself with sandpaper and grind it a little on the back of the card contacts. You need to remove a layer of about 15-20% evenly. To check the result - insert the card into its iPhone 6 tray and make sure that it does not protrude above the metal edge of the tray.

It is also recommended to slightly sand the edges so that they do not have villi. But in no case do not use sanding paper on the contacts, as this will most likely render your SIM card unusable.

After grinding, wipe the card with a damp cloth and let it dry - insert it into the device and use it to your health.

Old sims won't work! If you have a very old SIM card, then it may not work after the cutting procedure. This is a feature of old SIM cards, keep this in mind.

We hope this article helped you.

When switching from an old phone to a new modern type, for example, iPhone 5s or iPhone 6, you involuntarily encounter the problem that the old SIM card does not fit and you need the so-called NanoSim. It is not necessary to buy it, you can simply.

How to crop old sim card most to nanosim?

In order to trim sim card for iphone 5s You will need these tools and a pen.

There are several types of old-style SIM cards, I was lucky, I have a more modern type of 2FF or a SIM card with a minichip with 3 tracks. If you have the same, then cropping will not take more than 5 minutes. About, how to cut an old sim card with 4 tracks, I will cover in the next article.

How to cut a SIM card for iPhone 5s?

So:
1. Using an i-clip, we take out the tray from the phone and measure the width of the cavity for the SIM card in it.

The photo shows that it is slightly less than 9 mm, and this is just the width of the chip on the SIM card. Those. draw straight lines along the sides of the chip with a pen.

Those. we draw a line, stepping back from the edge of the chip about 1.5 mm from the side of the cut corner on the SIM card, and on the opposite side we draw a line along the chip. Like this:

3. Now we will make a small corner, approximately the same as on the tray (legs 1.5-2 mm). To do this, I simply set aside a line on the edge of the chip parallel to the corner of the SIM card.

4. Along the lines, we begin to cut the old SIM card under the iPhone 5s tray.

5. The result is such a nano SIM card.

7. Insert the resulting result into the iPhone tray and check!

The network is found, so everything is done correctly!

This method is also suitable if you need to cut MicroSim to Nanosim.

We didn't have a chance to test how well a self-cut nano-SIM would work. There is no guarantee that the card will eventually be fully functional. In addition, all measurements were made manually and only based on mathematical knowledge.

In contact with

And so we will present you a video of one of the users who managed to cut a nano SIM from a micro SIM. The required dimensions were taken from the nano SIM description. The result is a 100% match in “dimensions”, so theoretically the card has every chance to prove its suitability for working in the iPhone 5. But, of course, it is still better to purchase a SIM card from an official mobile service provider.

Watch the video tutorial below:

Warning: Before starting, please read additional information. And first of all, take your time, be careful.

It is clear that it would be much more correct to purchase the original nano SIM, but if for some reason this is not possible, then this video instruction will come in handy.

First of all, from the nano SIM specification, we have the following overall dimensions: width: 12.3 mm, length: 8.8 mm, thickness: 0.67 mm. For measurements, it is best to have an electronic caliper on hand, because a regular ruler will not work in this case.

The ETSI website reports that nano SIMs can be made different ways, but they will all be compatible with current SIM standards. In addition, it is confirmed that the new design offers the same functional features as all SIM cards.

First, measure the dimensions (width, length, thickness) of the card you have. This is necessary in order to have an idea where and how much it will be necessary to cut off in order to make a homemade nano-Sim out of it.

It is clear that the sizes of some micro SIMs may differ, but in general they are approximately the same.

In the prototype, the dimensions of the micro SIM are as follows: width - 14.99 mm, length - 12.03 mm, thickness - 0.81 mm. I had to cut it 2.69 mm wide and 3.28 mm long. The most difficult thing was to reduce the card by 0.14 mm in thickness.

For "surgical manipulation" in length and width, ordinary scissors were used. Sandpaper came up to reduce the thickness of the card.

When adjusting the overall parameters, it is necessary to periodically check the dimensions with a caliper. Everything is done carefully and carefully, because any mistake in fitting can lead to the destruction of the chip itself.

The result is a card very reminiscent of a real nano SIM. Of course, you should not rush, because the performance of such a “home-made product” has not been tested, so we do not recommend immediately sitting down and cutting the existing SIM card before you get the legendary iPhone 5. Otherwise, it will no longer be possible to restore it. Recall that the performance of the card was tested only on Nokia. As a result, the device detected a “new” SIM card, which in principle guarantees a high chance of a successful completion of the operation.

And finally, a friendly tip, first try to make a nano SIM from an old or unnecessary SIM card.