home > Thousand > Fast travel in skyrim code. Skyrim (Skyrim)

Fast travel in skyrim code. Skyrim (Skyrim)

TGM	Enable Character Immortality, Infinite Weapon Charges, Infinite Carry Weight
TCL	Enable the ability to walk through walls
TMM 1	Open all locations on the global map
Player.SetAV Invisibility 1	Enable invisibility. Neither enemies nor allies will notice you. (To disable invisibility, enter 0 instead of 1)
Player.SetAV SpeedMult [#]	Set running speed as a percentage. (default: 100%)
SetGS fJumpHeightMin[#]	Set jump height (default: 100%)
Player.SetAV AttackDamageMult [#]	Increase weapon damage by # times
Player.SetAV LeftWeaponSpeedMult [#]	Increase the attack speed of your off-hand weapon by # times
Player.SetAV WeaponSpeedMult [#]	Increase the attack speed of your right hand and two-handed weapons by # times (all two-handed weapons count as a right hand weapon)
PSB	Get all spells, abilities, shouts of power (Warning! leads to game instability, not recommended for use)

skyrim codes
1.2. The main characteristics of the hero

ShowRaceMenu	Change the character's race. Allows you to go back to the character settings menu (Attention! After entering this code, character skills may be reset)
Player.AdvLevel	Raise character level
Player.SetLevel[#]	Set the required character level
Player.SetAVHealth[#]	Set max. number of lives in # units
Player.SetAV Magicka [#]	Set max. amount of magic in # units
Player.SetAV Stamina [#]	Set max. amount of stamina in # units. If set great importance, then the character will not get tired while running
Player.ModAV CarryWeight [#]	Increase your character's maximum carry capacity by # units
Player.SetScale[#]	Increase the growth of your character, where #: 1 - 100%, 1.1 - 110%, 0.9 - 90%, etc.

Codes in the game Skyrim
1.3. Character Skills

Increasing experience in skills:

AdvSkill Onehanded 999999	develop the "one-handed weapon" skill for 999999 experience
AdvSkill Twohanded 999999	Two-handed weapon
AdvSkill Marksman 999999	shooting
AdvSkill Block 999999	block
AdvSkill Smithing 999999	blacksmith craft
AdvSkill HeavyArmor 999999	heavy armor
AdvSkill LightArmor 999999	light armor
AdvSkill Pickpocket 999999	pickpocketing
AdvSkill Lockpicking 999999	breaking
AdvSkill Sneak 999999	secrecy
AdvSkill Alchemy 999999	alchemy
AdvSkill Speechcraft 999999	eloquence
AdvSkill Alteration 999999	change
AdvSkill Conjuration 999999	witchcraft
AdvSkill Destruction 999999	destruction
AdvSkill Illusion 999999	illusion
AdvSkill Restoration 999999	recovery
AdvSkill Enchanting 999999	enchantment

Setting the skill level:

Player.SetAV Onehanded 100	raise "one-handed weapon" to level 100
Player.SetAV Twohanded 100	Two-handed weapon
Player.SetAV Marksman 100	shooting
Player.SetAV Block 100	block
Player.SetAV Smithing 100	blacksmith craft
Player.SetAV HeavyArmor 100	heavy armor
Player.SetAV LightArmor 100	light armor
Player.SetAV Pickpocket 100	pickpocketing
Player.SetAV Lockpicking 100	breaking
Player.SetAV Sneak 100	secrecy
Player.SetAV Alchemy 100	alchemy
Player.SetAV Speechcraft 100	eloquence
Player.SetAV Alteration 100	change
Player.SetAV Conjuration 100	witchcraft
Player.SetAV Destruction 100	destruction
Player.SetAV Illusion 100	illusion
Player.SetAV Restoration 100	recovery
Player.SetAV Enchanting 100	enchantment

Codes in the game Skyrim
1.4. Character Perks

With the help of these cheat codes for Skyrim, you can quickly upgrade all the skills and get all the perks. To do this, we need the following cheats:

To upgrade all perks, do the following:

1. Using the AdvSkill [X] cheat, we raise any skill to level 100:

Example: AdvSkill Destruction 999999.

2. Apply the code Player.SetAV [N] 0 - set the skill level to 0.

Example: Player.SetAV Destruction 100.

3. After that, you can again add new experience to this skill. Repeat steps 1 and 2 to earn more ability points. From time to time we lower the level of the character to the previous value.

4. Earned points, which are several times more than usual, we spend on the purchase of all available perks in Skyrim.

All perks and spells can be added manually if you know their exact name.

Player.AddPerk [name]	Add Ability
Player.RemovePerk [name]	Remove ability. Ability points will not be refunded
Player.AddSpell [name]	Add Magic Ability to Player Character
Player.RemoveSpell [name]	Remove Ability

Skirim codes
1.5. Increase damage from weapons, spells

These codes increase the effectiveness of skills by the required percentage (base value * N%). For combat skills, this means an increase in damage from all hits, spells of this type.

Example: Player.SetAV DestructionPowerMod 100

This code will increase the damage from destruction spells by 100%, that is, twice.

Player.SetAV OneHandedPowerMod [#]	increase the damage of "one-handed weapons" by # percent
Player.SetAV TwoHandedPowerMod [#]	Two-handed weapon
Player.SetAV MarksmanPowerMod [#]	shooting
Player.SetAV BlockPowerMod [#]	block
Player.SetAV SmithingPowerMod [#]	blacksmith craft
Player.SetAV HeavyArmorPowerMod [#]	heavy armor
Player.SetAV LightArmorPowerMod [#]	light armor
Player.SetAV PickPocketPowerMod [#]	pickpocketing
Player.SetAVLockpickingPowerMod [#]	breaking
Player.SetAV SneakPowerMod [#]	secrecy
Player.SetAV AlchemyPowerMod [#]	alchemy
Player.SetAV SpeechcraftPowerMod [#]	eloquence
Player.SetAV AlterationPowerMod [#]	change
Player.SetAV ConjurationPowerMod [#]	witchcraft
Player.SetAV DestructionPowerMod [#]	destruction
Player.SetAV IllusionPowerMod [#]	illusion
Player.SetAV RestorationPowerMod[#]	recovery
Player.SetAV EnchantingPowerMod [#]	enchantment

Cheats from Skyrim
1.6. The screams of dragons

Each line of the table contains three codes. You can only enter one of the three.

Player.TeachWord [shout code]	Learn the word of power
Player.TeachWord 46B89 Player.TeachWord 46B8A Player.TeachWord 46B8B	Call of the Dragon
Player.TeachWord 13E22 Player.TeachWord 13E23 Player.TeachWord 13E24	juggernaut
Player.TeachWord 602A3 Player.TeachWord 602A4 Player.TeachWord 602A5	ice form
Player.TeachWord 6029A Player.TeachWord 6029B Player.TeachWord 6029C	thunder call
Player.TeachWord 20E17 Player.TeachWord 20E18 Player.TeachWord 20E19	fire breath
Player.TeachWord 48ACA Player.TeachWord 48ACB Player.TeachWord 48ACC	Time slowdown
Player.TeachWord 2F7BB Player.TeachWord 2F7BC Player.TeachWord 2F7BD	Rapid dash
Player.TeachWord 60291 Player.TeachWord 60292 Player.TeachWord 60293	friendship with animals
Player.TeachWord 3291D Player.TeachWord 3291E Player.TeachWord 3291F	Elemental Fury
Player.TeachWord 32917 Player.TeachWord 32918 Player.TeachWord 32919	incorporeality
Player.TeachWord 5D16C Player.TeachWord 5D16D Player.TeachWord 5D16E	frosty breath
Player.TeachWord 602A0 Player.TeachWord 602A1 Player.TeachWord 602A2	Disarmament
Player.TeachWord 3CD31 Player.TeachWord 3DC32 Player.TeachWord 3CD33	Clear sky
Player.TeachWord 51960 Player.TeachWord 51961 Player.TeachWord 51962	Call of Valor
Player.TeachWord 44251 Player.TeachWord 44252 Player.TeachWord 44253	dragon slayer
Player.TeachWord 60297 Player.TeachWord 60298 Player.TeachWord 60299	death sentence
Player.TeachWord 60294 Player.TeachWord 60295 Player.TeachWord 60296	Aura whisper
Player.TeachWord 6029D Player.TeachWord 6029E Player.TeachWord 6029F	kin world
Player.TeachWord 3291A Player.TeachWord 3291B Player.TeachWord 3291C	fright

Shouts from Skyrim: Dawnguard DLC

Player.TeachWord 02008A65 Player.TeachWord 02008A64 Player.TeachWord 02008A63	Life drain
Player.TeachWord 020030D4 Player.TeachWord 020030D6 Player.TeachWord 020030D7	Challenge of Durnevir
Player.TeachWord 02007CB7 Player.TeachWord 02007CB8 Player.TeachWord 02007CB9	Soul tear
Player.TeachWord 0201A162 Player.TeachWord 0201A163 Player.TeachWord 0201A164	Call from Cairn of Souls

Shouts of Skyrim: Dragonborn DLC

Open Shouts of Dragons must be activated with Dragon Souls before use. In the game, Souls are only given for killing dragons. With the help of codes, you can add the necessary Souls to your inventory:

To activate dragon screams, press: "Tab" - "Magic" - "Screams", select a cry, press "R" - "Ok". After that, the selected shout can be used.

TES 5: Skyrim Cheats
1.7. Healing from diseases

Player.AddSpell 00092C48	Lycanthropy- a spell to turn into a werewolf. Appears in the "Talents" section. Use the "Z" key to activate. This talent cannot be removed. The reverse transformation into a person will occur automatically, after a certain period of time
Player.AddSpell 000B8780	Vampirism- the disease "Sangvinare Vampiris" appears. 3 days after infection, you have a 10% chance that you will become a vampire. If 3 days after using this code in the "Magic" section - " Active effects"Vulnerable to fire" will appear - you are a vampire. If all else fails, use the Player.RemoveSpell 000B8780 command, then again Player.AddSpell 000B8780
Player.RemoveSpell 000B8780	Get cured of vampirism - the disease "Sangvinare Vampiris". It works only at the first stage of the transformation (after the bite). After a full transformation into a vampire, this code does not work!
SetStage 000EAFD5 10 ResetQuest 000EAFD5	Get rid of vampirism. It can cure any stage of the disease. Healing occurs by completing the quest, so in order to apply the code a second time, you must first reset the quest with the “ResetQuest 000EAFD5” command, then type “SetStage 000EAFD5 10” again. (Save before resetting quests)

2. Codes for getting items

TES V: Skyrim codes
2.1. Standard inventory management commands

skyrim 5 cheats
2.2. Codes for gold

The Elder Scrolls V codes
2.3. Armor sets (sets)

Daedric Armor Set

Draconic Shell Armor Set

Draconic Scale Armor Set

Unique armor with bonuses

Player.AddItem 0007C932 1	Robe of the Archmage (armor) + 100% to the speed of recovery of magic; all spells cost 15% less magicka
Player.AddItem 000F9904 1	Scholar's Diadem (helmet) All spells cost less magicka
Player.AddItem 000FC5BF 1	Bloodthirst Tarch (Shield) Shield Bash deals 3 damage. damage over 5 sec.
Player.AddItem 000E41D8 1	"Shield of Ysgramor" +20% magic resistance; +20 pts health
Player.AddItem 000295F3 1	"Helmet of Yngol" +30% cold resistance
Player.AddItem 0002AC61 1	Skin of the Savior (light armor) +50% resistance to poisons and +15% magic
Player.AddItem 00052794 1	"Ebony Mail" (heavy armor) +You move more quietly and enemies that get too close take 5 poison damage per second
Player.AddItem 00045F96 1	Spell Breaker (Shield) +Absorbs up to 50 damage when blocked. spell damage

Masks (helmets) with bonuses

Player.AddItem 00061CB9 1	"Krosis" +20% to hacking, archery and alchemy skills
Player.AddItem 00061C8B 1	Morokei +100% Magicka Recovery Speed
Player.AddItem 00061CA5 1	"Nakrin" + spells of the school of destruction and restoration consume 20% less mana; +50 mana
Player.AddItem 00061CC9 1	"Vokun" + Illusion, Alteration and Affliction spells cost 20% less mana
Player.AddItem 00061CC2 1	"Otar" + resistance to fire, electricity and cold increases
Player.AddItem 00061CC0 1	"Ragot" +70 stamina
Player.AddItem 00061CAB 1	Volsung +20% discount on all products; breathing underwater; +70 weight capacity
Player.AddItem 00061CC1 1	"Khevnorak" + immunity to diseases and poisons
Player.AddItem 00061CCA 1	"Wooden Mask"
Player.AddItem 00061CD6 1	"Konarik" +Gives a chance to heal the wearer and deal damage to nearby enemies when health is low
Player.AddItem 000D2846 1	"Mask of Clavicus Vile" (heavy helmet) +10 Speech. Magicka recovery rate +5%. Favorable prices +20%

The Elder Scrolls 5 codes
2.4. Weapon sets

Maces, Axes, axes

Player.AddItem 00035369 1	"Staff of Magnus" +Absorbs 20 damage. magic per second, if the enemy has no magic - absorbs health
Player.AddItem 0010076D 1	"Staff of Hevnorak" +Within 30 sec. deals 50 damage. lightning damage per second. applied to the surface
Player.AddItem 000AB704 1	"Staff of Holdir" +Soothes weak enemies for 60 seconds. or captures their souls if they die
Player.AddItem 000E5F43 1	"Staff of Jurik Goldurson" deals 25 damage. damage and takes 50 damage. of magic
Player.AddItem 0006A093 1	"Staff of Tandil" +Creatures and people up to level 12 do not fight for 60 seconds
Player.AddItem 0002AC6F 1	"Wabbajack" + Random effect on every use
Player.AddItem 0001CB36 1	"Rose Sanguine" + Summons a Dremora for 60 seconds
Player.AddItem 00035066 1	"Skull of Corruption" +20 pts damage. Dreams gathered from sleeping humans increase damage to 50

Unique weapons with bonuses

Player.AddItem 000F1AC1 1	"Scourge of Dragons" +40 pts damage to dragons and +10 HP. electricity damage vs all
Player.AddItem 000F5D2D 1	"Pale Blade" +25 pts cold damage; subtract 50 stamina from the target; weaker creatures and humans flee for 30 seconds
Player.AddItem 000956B5 1	"Wutrad" +Especially deadly against elves
Player.AddItem 000B3DFA 1	"Crayon's Eye" +Fire blast deals 40 fire damage. damage in a 4.5 m radius and sets targets on fire
Player.AddItem 000A4DCE 1	"Bloody Thorn" +Fills a soul gem if an enemy dies within 3 seconds
Player.AddItem 00053379 1	"Fierce" +15 pts cold damage; takes 15 units. enemy's stamina
Player.AddItem 000F8317 1	"Cooler" +30 pts cold damage; chance to paralyze the target for 2 seconds
Player.AddItem 00094A2B 1	"Phantom Blade" +3 units extra damage by ignoring armor
Player.AddItem 000AB703 1	"Curse of the Red Eagle" +Sets undead level 13 or below on fire and rout for 30 seconds
Player.AddItem 0009FD50 1	"Rage of the Red Eagle" +5 units fire damage and sets the target on fire
Player.AddItem 000B994E 1	"Valdar's Lucky Dagger" +25% Critical Strike Chance

Cheats for the game Skyrim
2.5. Accessories

Cheats Skyrim
2.6. Consumables: Ingredients, Soul Stones, Potions, Arrows

Soul Stones

Books

Cheats from the game Skyrim 5
2.7. Treasure chests

The game itself provides special cheat chests, which contain all items of a certain type. For example, in one chest are all kinds of staves, in the other - all kinds of arrows.

Notes:

After opening cheat chests, the game can freeze a lot. In this case, you just need to wait no more than 1 minute.

If, after opening such a chest, you do not look at the items, but immediately take all the contents (the "R" key), then the game can be frozen.

Player.PlaceAtMe	Create a new chest right in front of the hero
Player.PlaceAtMe 000C2CDF	Enchanted Weapon Set
Player.PlaceAtMe 000C2CD7	A set of enchanted armor, jewelry, mage and rogue clothes
Player.PlaceAtMe 000C2CE0	Standard weapon set
Player.PlaceAtMe 000C2CD6	Standard armor set
Player.PlaceAtMe 000C2CDE	Staff set
Player.PlaceAtMe 000C2CD8	A set of armor and jewelry, clothes for a mage and a robber
Player.PlaceAtMe 0010D9FF	Skill book set
Player.PlaceAtMe 000C2CD9	Spell Book Set
Player.PlaceAtMe 000C2D3B	Set of regular books
Player.PlaceAtMe 000C2CD4	Arrow set
Player.PlaceAtMe 000C2CDA	Set of ingredients
Player.PlaceAtMe 000C2CDB	A set of keys
Player.PlaceAtMe 000C2CE1	A set of scrolls with spells
Player.PlaceAtMe 000C2CE2	A set of potions, elixirs and tinctures

Skyrim cheat codes
2.8. Enchanting (upgrading) weapons and armor

Enchantment is a skill with which you can independently add magical properties to ordinary objects.

Rules for creating enchanted items:

You can only upgrade the base item, no other enchantments;

Each item can have a maximum of 2 enchantments;

The quality of the enchantment depends on the Enchanting skill;

1) upgrade the Enchantment skill to level 100 - Player.SetAV Enchanting 100.

2) open all enchantment perks (way to upgrade perks).

There is a cheat code for adding an already finished enchanted item to the inventory. To do this, you need to know the base item code and the enchantment code:

Once enchanted, the item will have a very small charge (170-350). To increase the charge of a weapon, you must pick it up and enter the following code:

skyrim cheat codes
2.9. Legendary weapons and armor

Legendary weapon and armor are standard items, but with significantly improved performance. These things are created by professional blacksmiths (skill level from 91 to 100). The percentage of item improvement directly depends on the level of the Blacksmithing skill. The higher the skill, the better the characteristics of the created legendary item will be.

What you need to upgrade weapons and armor to legendary quality:

1) blacksmithing level 91+;

2) workbench;

3) conventional armor or weapons;

4) ingredients to improve (different for all things).

All these things in Skyrim can be obtained in the usual way, but it will take a long time. With the help of cheat codes, this process can be greatly accelerated. Enter the following codes:

1) Player.SetAV Smithing 100- we pump "Blacksmithing" to level 100;

2) Player.PlaceAtMe 000D932F- create a workbench right in front of you;

3) Player.AddItem [number]– add a blank item to the inventory (item codes can be viewed here).

4) In the game, we approach the workbench, look at what ingredients are needed to improve the selected item;

5) Player.AddItem [number]– add the necessary ingredients to the inventory (item codes can be viewed here);

6) We approach the workbench, we improve the item to legendary quality.

TES V: Skyrim codes
2.10. How to find the ID of an item

You can add absolutely any item to your inventory, the main thing is to know its game code. If you already have some unique item, and you want to create several more copies of this item, then you can determine the item code:

1) In the console, enter the code: Player.ShowInventory

Note. This method always works, but if you have too many items in your inventory, it may be difficult to find the item you need. In this case, use the second method.

1) The item whose ID you need to find out is placed in an empty box (barrel, chest, bag or something else).

2) We approach the box as close as possible (preferably sit down).

3) Open the console, click on the box in which our item lies, enter the command INV.

4) Looking for required item by name and look at the ID of the item.

Having learned the item code, we use it in a standard cheat to add an item:

3. Codes for placing objects

Skyrim cheats and codes
3.1. Determining the object code

These commands work only when a certain object is selected in the console. To select an object in the console, you just need to click on it with the mouse. After selecting an object, an inscription with the object code (object_ID) will appear in the console.

To scroll through the text in the console, if there is a lot of it, use the "Page Up" and "Page Down" keys.

If you want to apply several commands to the same selected character or object, then you do not need to select it with the mouse each time, it is enough to select only 1 time (the selection is saved).

There are many invisible objects in the game (sound sources, light sources, quest zones), they can be mistakenly selected instead of the necessary item, so it is advisable to be as close to the object as possible to make it easier to hit it. Various game special effects (fog, snow, blizzard) also complicate the process of selecting an object.

Objects that are out of screen visibility can be selected in the console only by their game code ID. This is done using the PRID [item code] command.

skyrim console commands
3.2. Placement of objects

To work following commands you must first select the object - open the console and click on the object. After that, an inscription (object ID) should appear in the middle of the console screen.

(All the objects you create have an ID that starts with FF000...)

Notes:

To apply several commands to the same object, you do not need to select it again each time, the selection is saved.

Sometimes, after applying the Setpos and GetAngle commands, the object moves only visually, physically it remains in the same place (the texture is shifted, not the object itself). To fully move an object, you need to select it and enter two more commands: Disable And enable. You can also enter the command Setscale 1 to update the physical model of the item.

To align an incorrectly placed item, enter:

SetAngle x 0, SetAngle y 0, SetAngle z [any number].

Object Management

Cheats from Skyrim
3.3. Objects for home

Many Skyrim players have their own home or favorite place where they spend a lot of time. But not every place has the necessary jobs: alchemy tables, forges, workbenches.

These cheat codes allow you to install jobs anywhere:

Furniture for home

When created, all items appear in front of you in the direction you are facing. To set the item straight, before introducing the cheat, center your gaze so that the character looks straight ahead, and not up or down.

Player.PlaceAtMe 00089A85 1	dummy
Player.PlaceAtMe CC16A 1 Player.PlaceAtMe CC163 1	single door
Player.PlaceAtMe CC164 1	double door
Player.PlaceAtMe B2456 1	dragon head
Player.PlaceAtMe 3FA65 1	elk antler
Player.PlaceAtMe DD9E0 1 Player.PlaceAtMe DD9E1 1 Player.PlaceAtMe CF264 1	moose head
Player.PlaceAtMe D9285 1	crab
Player.PlaceAtMe D9276 1	goat head
Player.PlaceAtMe 3858F 1	fish
Player.PlaceAtMe D928F 1 Player.PlaceAtMe D928D 1	big cat head
Player.PlaceAtMe D9289 1 Player.PlaceAtMe D9288 1	wolf head
Player.PlaceAtMe D9287 1 Player.PlaceAtMe D927D 1	beast head
Player.PlaceAtMe D8282 1 Player.PlaceAtMe D9281 1 Player.PlaceAtMe D927F 1	bear head
Player.PlaceAtMe 93D39 1 Player.PlaceAtMe 93D3B 1 Player.PlaceAtMe 93D3D 1 Player.PlaceAtMe 93D3F 1 Player.PlaceAtMe 93D41 1 Player.PlaceAtMe 93D43 1 Player.PlaceAtMe 93D45 1 Player.PlaceAtMe 93D47 1 Player.PlaceAtMe B7E3E 1 Player.PlaceAtMe B7E40 1 Player.PlaceAtMe BF9CF 1 Player.PlaceAtMe BF9D1 1 Player.PlaceAtMe BF9D3 1 Player.PlaceAtMe BF9D5 1	carpets (square)
Player.PlaceAtMe 95498 1 Player.PlaceAtMe 954A3 1 Player.PlaceAtMe 954A4 1 Player.PlaceAtMe 954A5 1	carpets (round)
Player.PlaceAtMe 5C015 1 Player.PlaceAtMe 5C016 1 Player.PlaceAtMe 5C017 1	animal skins
Player.PlaceAtMe 7EA42 1	wall burning candles
Player.PlaceAtMe 1F24A 1	table candle
Player.PlaceAtMe 5AD5B 1	ceiling lamp
Player.PlaceAtMe 77761 1	light source for illuminating dark rooms (invisible, cannot be selected/moved/deleted after installation)
Player.PlaceAtMe FFF46 1 Player.PlaceAtMe FFF48 1	blue light source

Mannequin Codes:

4. Codes for fast travel

Help [name part] 0	To find out the exact names of locations, enter the command. (There should be no spaces in the name of the location, and if there are, enter only the first word). In the list that appears, using the console scroll keys "PageUp" and "PageDown", we find the following lines: CELL: location_name (location id). Find out the full name or id of the location.
COC [location_name]	Teleportation to the specified location
COC Qasmoke	Teleportation to a test location. Everything is here game items and devices for the manufacture of any items
Player.MoveTo [object code]	Teleport to the specified object (character)
Player.GetPos x Player.GetPos y Player.GetPos z	Find out your current location in coordinates. (You need to enter 3 commands in turn and write down the coordinates shown. After that, you can teleport to this point using the following code)
Player.SetPosx[#] Player.SetPos y[#] Player.SetPos z [#]	Move your character to the specified coordinates. (Do not close the console until you use the command 3 times for each of the coordinates. The movement occurs only after closing the console).
TMM[#]	Enable/disable markers on the world map - remove everything. - show all. - show everything, but without the ability to fast travel

5. Codes for friendly characters (NPCs)

skyrim codes
5.1. Stop fight with NPC

1) We get up so that at once all the characters who attacked us are visible on the screen.

2) Turn on the console, select each NPC in turn, enter the codes for them:

3) Player.SetCrimeGold 0- turn off the reward for our head;

4) Stop Combat– turn off the aggressive behavior of the character.

5) Only after we turn off the reward for our head from all enemies, we can close the console. (If at least one NPC is not coded, he will start attacking us again, and after him all the other NPCs will become aggressive again. The remaining hostile characters are clearly visible on the minimap, they are highlighted with red dots, you must definitely apply the code to all) .

These commands do not work on our permanent enemies (monsters and some story characters) who always attack us.

Skyrim cheat codes
5.2. NPC customization

Setting the physical properties of the NPC:

GetPos [axis]	Gives the position along the axis (x,y,z)
SetPos [axis] [#]	Gives rotation along the axis (x,y,z)
SetAngle [axis] [#]	Rotates an object along the axis (x,y,z)
Move To Player	Move the NPC to the player character. If you use Player.PlaceAtMe, then a clone of an NPC will be created
Disable	"Turn off" the object. It will remain in the game, but will not be displayed and functional. For complete removal see markfordelete
enable	"Enable" object
Kill	Kill selected target
Resurrect 1	Resurrects the selected target
ResetAI	Restore Default Dialogs - Erase the memory of the selected NPC. This command must be used only if you killed someone, resurrected and after that he refuses to talk to you
SetEssential[#]	Makes an NPC mortal (0) or immortal (1)
Mark For Delete	Delete the selected object or character. Important: with this code, you can remove not only a chest, but also invisible objects that can be selected by clicking on them, and which are necessary for the normal functioning of the game. Be careful when using this command. Objects created by console commands are deleted immediately, while objects present in the game initially are deleted after saving and loading the game. There are no reverse commands. To remove objects from the game, it is recommended to use this command, and not disable, since the latter only hides the item, and does not remove it, as a result of which saves are bloated due to unused objects.

Customization of the personality, characteristics, skills of the NPC:

SetRace	Changes the character's race. There are also ElderRace and ElderRaceVampire values - these races are something like elders, (for example, Esbern is Elder, but he is also a Nord. Greybeards are also included here). Also, if you add Vampire at the end, then the object will become a vampire (example: OrcRaceVampire). Race names: Argonian Race- Argonian, Breton Race- Breton, Dark Elf Race- Dark Elf, Elder Race- Forest Elf, High Elf Race- High Elf, Imperial Race- Imperial, KhajiitRace- Khajiit, Nord Race- Nord, Orc Race- Orc, RedguardRace- Redguard.
SetLevel ,,,	Sets the level of an NPC. Enter SetLevel 1000,0,1,81 to make the character evolve with the player's character from level 1 to 81. 1) [% ? 10] The percentage of the level to the main character (1000 = 100.0%). 2) How much above or below the level. 3) [initial level] The most initial level of an NPC. 4) [limit level] Max Level an NPC he can evolve into
GetAV [har-ka]	Gets the current value of each variable
ModAV [char] [#]	Adds the specified amount to the value
ForceAV [char] [#]	Sets value to # count
SetAV [char] [#]	Sets the specified amount of the specified value. Unlike modav, it does not add to the value, but sets it
HasPerk	Checks if the character has the given ability.

NPC equipment setup:

INV	Display the entire inventory of an object/NPC
SBM	Displays the trading menu with a character or creature even if it is not a merchant
OpenActorContainer 1	open the inventory of the selected creature. You can exchange items
DuplicateAllitems Player	copy all items from the inventory of the specified NPC or object to your inventory
AddItem[#]	Adds an item to an NPC's inventory. Note: it is useful to add gold to merchants
Equipitem[#]	Equips an item on the selected character.
RemoveAllItems	Removes all items from an object
ResetInventory	Equip the selected character in their original equipment

Setting up movements, NPC relations:

SetRelationshipRank[#]	Changes the relationship of two NPCs to each other. [#] Possible values #: -4 - worst opponents, -3 - enemies, -2 - enemies, -1 - rivals, 0 - acquaintances, 1 - friends, 2 - confidants, 3 - allies, 4 - lovers. All other values are set to 0 (familiar) Note: This code will also work on the player if you type: player.SetRelationshipRank [#]
TDetect	Turn off NPC vision. Theft without consequences. Doesn't work on pickpocketing
TCAI	Enable/disable aggressive actions by characters and creatures. After cast, everyone stops fighting.
TAI	Enable / disable the intelligence of characters and creatures. All the way to moving
Player.SetCrimeGold[#]	Sets a bounty on the head of a player character in a specific faction
Player.SetCrimeGold 0	Cancel the bounty on your head
Stop Combat	End combat with selected friendly character

Skyrim V codes
5.3. NPC control

With the help of these cheats, you can take control of any monster or character. Do everything strictly in the specified sequence:

1) Switch to third person view (F key).

2) We approach the desired character or monster, whom we want to move into.

3) Open the console, select the monster with a mouse click, enter the codes:

5) Player.TC- Control the main character

6) TC- Control an NPC or creature

8) Close the console.

Notes:

After gaining control over the NPC, you can only move with it and cannot attack.

If you press attack, then your main character will attack, and not the one under your control. How to make NPCs attack is unknown.

To return to regular game and get control of your main character type in the console:

Cheats in the game Skyrim
5.4. Companions NPCs

In Skyrim, almost any character can be made your partner so that he follows us and helps in battles. To do this, we do the following:

1) We approach the required character, open the console, click on the character. Let's start typing codes:

2) SetRelationshipRank Player 3– transfer the character to a group of possible allies.

3) AddFac 0005C84D 1- add the necessary dialogue.

4) Close the console, continue the game. We speak with the character, select the dialog that appears: “Follow me. I need your help".

SetRelationshipRank Player 3	Transfer a character to a group of possible allies
AddFac 0005C84D 1	Add NPC dialogue to add him as a partner
Set PlayerFollowerCount to 0	Adds a dialogue for taking new partners. After the introduction of this command, the old partners will continue to follow the player, but you can take another partner. As soon as you take someone else as your partner, the old partner stops following you. If no one is following you, there are no satellites, then this command is useless. The maximum number of partners is 1. It makes no sense to enter something else instead of 0 - it will not give any effect.
Set PlayerFollowerCount to [#]	Set the number of companions. By setting "0", you can refuse all companions at once

6. Codes for completing quests

There are a lot of additional quests in Skyrim, which can take several months to complete. Quests are a chain of several tasks (quest stages). With the help of codes, you can quickly go through both individual stages of quests, and quests as a whole.

View codes from Skyrim
6.1. Quest Search

How to move to the quest objective:

ShowQuestTargets- get the ID-code of the quest. (Quest IDs, after the introduction of ShowQuestTargets, are located in exactly the same sequence as in the Quest Log).

4) In the resulting list, look for Current quest: , remember this ID. (To scroll through the text in the console, press the "PageUp" and "PageDown" keys).

5) Now enter MoveToQt to teleport to the quest target.

What are the codes in Skyrim
6.2. Passage of the quest

Start Quest	Start quest
Complete Quest	Complete the quest (This command is not recommended, as you won't be able to get the next quest if it's a quest chain. Use only if you want to complete the quest without being able to progress further).
Reset Quest	Reset all stages of the quest, after which it can be completed again. (In order for this quest to be removed from the Quest Log, you must save and load the game).
CompleteAllObjectives	Mark all quest tasks as completed
SetObjectiveCompleted [stage] [state]	Set all tasks of the quest stage to "completed" (1) or "failed" (0)
SetObjectiveDisplayed [stage] [state]	Set the state of the tasks of the quest stage (0 - disabled, 1 - enabled)
SAQ	Start all quests in the game (may crash the game!)
CAQS	Complete all quests in the game (may crash the game!)

Complete the quest step with the code:

1) We save the game and do not overwrite this save until we complete the quest.

2) Open your list of tasks (key "J"). Select the quest you want to complete and press Enter.

3) Open the console and enter ShowQuestTargets- get the ID-code of the quest.

4) Enter GetStage. The stage of this quest will appear in the console in the following form: GetStage >> [number].00. We remember the number of the current stage of the quest.

5) Enter SQS- get a list of all stages of the specified quest in the following form Stage [stage]: 1 (or 0). 1 - means that the stage has been passed, 0 - the stage has not yet been completed. In the resulting list, we are looking for our memorized stage of the quest. Remember the number of the next step.

6) Enter SetStage [stage]- set the stage of the quest. As a stage, enter the number of the next stage.

7) Enter MoveToQt- teleportation to the target of the selected task.

We begin to independently pass the next stage of the quest.

Complete the entire quest with the code:

If you complete a quest with the CompleteQuest command, it will simply be marked as completed and you will no longer be able to continue it. At the same time, you will not receive any reward for such a quest.

To receive all the rewards for the quest, you must complete all of its component stages one by one. To do this, execute commands 6), 7) from the previous paragraph until all stages in the quest are completed. This is how you can complete any quest 100%.

7. Other codes

RPG Skyrim Cheats
7.1. Graphics and animation settings

TFC	Enable/disable free camera
TM	Enable\disable interface
TG	Enable/disable grass
FOV[#]	Change the view camera view from the first person (default: 60-90)
Set TimeScale to [#]	Set game time flow rate (20 - default, 1 - real day, 0 - stop time of day)
Set KillMoveRandom to [#]	Set the probability of finishing animation (50 - default, 100 - maximum, 0 - disable)
Set DecapitationChance to [#]	Set decapitation probability (40 - default, 100 - maximum, 0 - disable)
SW	Changes the weather
FW	Changes the weather to another random

skyrim codes
7.2. Game settings

8. Solving problems with entering codes

skyrim codes
8.1. Remove squares when entering cheat codes

It often happens that when entering codes into the Skyrim console, not letters and numbers are displayed on the screen, but empty squares. This happens because the letters of the Russian alphabet are entered, and they are not supported in the game console. There are several methods to solve this problem.

Method 1. Switching the font in the game

Press the "Scroll Lock" key to switch the alphabet right in the game. (It doesn't always work!)

Method 2. Change the font

1) Go to the folder with the game, find the file: Skyrim\Data\Interface\fontconfig.txt.

2) In the properties of this file, remove the checkmark "Read only".

3) Open the file, replace the following line:

Map "$ConsoleFont" = "Arial" Normal
on
map "$ConsoleFont" = "FuturaTCYLigCon" Normal

Method 3. Set the English language in the console

If for some reason you can’t remove the squares in the console, then enter the cheat codes as they are. In this case, you will not see what you enter, but the codes will work. But before that, it is imperative to change the language in the console to English:

1) Go to C:\Users\[username]\Documents\My Games\Skyrim

2) Open the Skyrim.ini file.

3) In the text of the Skyrim.ini file after the lines:

sLanguage=RUSSIAN

add (not replace) the following line:

SConsole=ENGLISH

Method 4 - Set the English Language in the Steam Client

During the game, press the key combination "Shift" + "Tab". Right click on your Steam nickname, click change language, select "EN".

If none of the methods work and you are not the owner original version game, then you should think about finding another image with the game or purchase the original version.

Method 5. Set the default language to English in the OS

If you cannot change the input language with sConsole=ENGLISH then you need to set the default language to English operating system computer.

1) "Start" menu, line "Run ..."

2) Enter the text: control international

3) Go to the tab "Languages", "Details..."

1) Go to "Start", the line "Control Panel"

2) In the panel, select "Regional and Language Options", tab "Languages and Keyboards"

3) Select "Change keyboard..."

4) Find "Default input language" and select "English (United States)", "Ok".

1) In the lower right corner of the desktop screen, click on the inscription "RUS".

2) In the "Language Settings" menu, select "English. Keyboard layout: USA.

3) Move the selected line to the very top - press the "Up" button.

After that, the codes in Skyrim should display normally.

	Achievement "Honorary reader site" Liked the article? As a thank you, you can put a like through any social network. For you it is one click, for us it is another step up in the rating of gaming sites.
	Achievement "Honorary Sponsor Site" For those who are especially generous, there is an opportunity to transfer money to the account of the site. In this case, you can influence the choice of a new topic for an article or passage. money.yandex.ru/to/410011922382680

+ Add comment

player.moveto (no brackets)- teleport to the specified object (character)

coc qasmoke- will move to the test location. There are all game items and devices for the manufacture of any items.

coc riverwood- exit the test location, move to "Riverwood". If you enter another name instead of "riverwood", then a teleport to the specified location will occur.

player.setpos [axis] [number] (no brackets)- move your character to the specified coordinates. Instead of an axis, you must specify x,y or z. And instead of a number - an offset along the selected axis.

Notes for player.setpos [axis] [number] (no brackets)

To find out your current location, type player.getpos [axis] (without parentheses). This command must be executed 3 times and instead of the axis, write x, y and z in turn. Then write down / remember all three received numbers.

If you know the exact coordinates to move, obtained earlier with the player.getpos [axis] command (without brackets), then use the player.setpos [axis] [number] command (without brackets) to move to the specified coordinates.

Do not close the console until you use the player.setpos [axis] [number] command (without brackets) 3 times for each of the coordinates (x,y,z).

The move only happens after the console is closed.

player.removeallitems- clear inventory. Removes ALL items in your inventory.

prid (without brackets) - select an object by its ID. An analogue to the following action: open the console - click on the object. After this command, the inscription “(object ID)” should appear in the console. After that, you can apply all the cheats written below without selecting the object. With this cheat code, you can select a very distant object and apply the necessary action to it. For example, resurrect someone or view the contents of the inventory.

To open the console press [ ~ ] (tilde) and enter the following cheat codes:

Main list of cheat codes

tgm - invulnerability mode
tcl - walk through walls
tmm 1 - open the world map (all points on the map)
killall - kill all (friends/enemies) in line of sight
psb - get all spells, dragon calls and talents
qqq - exit the game
advlevel - raise the level. Does not add ability points.
tfc - "free" camera mode
tdetect - theft without consequences. Turn off NPC vision. (added by Robin)
tcai - disable and enable artificial intelligence. Once cast, everyone stops fighting. (added by Robin)
set timescale to 0 - stop time. Default: 20. If you enter 10000 instead of 0, then one day will pass in a few seconds.

SexChange - change gender to the opposite. Your face won't change :)
Showracemenu - open the character creation window, where you can change: race, gender, appearance and name of the character. After changing the race, in early versions of the game, your character level will become 1. It will also reset all pumped skills. In version 1.3.10.0 of the game, after changing the race, the level of the character remains the same. Don't forget to save your game before applying this command command. (added by Robin)

player.setav invisibility 1 - enable invisibility. After that, neither enemies nor friends will notice you. To disable invisibility, enter 0 instead of 1.

player.modav carryweight X- increase the maximum carrying capacity of the character by X units
player.setav speedmult X- set movement speed X%. Applied after running while holding down the [ alt]. Default: 100%.
player.setscale X- increase the growth of your character, where X: 1 - 100%, 2 -200%, etc.
setgs fJumpHeightMin 100 - 100% jump height (default).

player.setav Health X X units
player.setav Magicka X X units
player.setav Stamina X- set max. the amount of power in X units. If set to a high value, the character will not get tired while running.

player.setav attackdamagemult N- Increase weapon damage N times (added Avenger)
player.setav leftweaponspeedmult N- increase the attack speed of the weapon in the left hand in N once
player.setav weaponspeedmult N- increase the attack speed of the weapon in the right hand and two-handed weapons in N once

player.setav LeftItemCharge N N units
player.setav RightItemCharge N N units
Notes:

all two-handed weapons are considered weapons in the right hand;
a fully loaded weapon has a charge level of about 3000;
each attack consumes about 30 units. weapon charge;
charge level can be set above 3000.

player.additem 0000000F N- get N gold
player.additem 0000000A N- get N master keys
player.placeatme 0010BF90 - Summon a Spectral Horse. Can be used indoors. (added Sam)

player.setcrimegold 0 - Remove the bounty on your head

player.addspell 00092C48 - Lycanthropy. Skill for turning into a wolf / werewolf. Appears in the "Talents" section. To activate use the [Z] key. You can't cancel the skin. The reverse transformation into a person will occur automatically, after a certain period of time.

Vampirism

player.addspell 000B8780- vampirism. Adds the Sanguinare Vampiris disease. 3 days after infection, you have a 10% chance that you will become a vampire. If after 3 days after using this code in the section "Magic" - "Active Effects" appears "Vulnerability to fire" - you are a vampire. And if nothing happened - use the command player.removespell 000B8780, after which again player.addspell 000B8780.
player.removespell 000B8780- will be cured of vampirism, the disease "Sangvinare Vampiris", which appears at the first stage of transformation (after a bite). After turning into a vampire, this code does not work.
setstage 000EAFD5 10- recover from vampirism. Always heals, but only works 1 time as healing happens after the quest is completed (this code ends the quest). (added 216623)

If you become a vampire for the second time and code setstage does not cure

save the game (new save, not quick save);
enter resetquest 000EAFD5
create another one new save and download it;
enter setstage 000EAFD5 10

Teleportation

player.moveto(without brackets) - teleport to the specified object (character)
coc qasmoke- will move to the test location. There are all game items and devices for the manufacture of any items. (added by Robin)
coc riverwood- exit the test location, move to "Riverwood". If you enter another name instead of "riverwood", then a teleport to the specified location will occur. How to find out the names of locations for teleportation, read a little below. (added by Robin)
player.setpos [axis] [number](without brackets) - move your character to the specified coordinates. Instead of axis you must specify x,y or z. And instead numbers- offset along the selected axis.

Notes for player.setpos [axis] [number](no brackets)

To find out your current location, enter player.getpos [axis](without brackets). This command needs to be run 3 times and instead of axis take turns writing x,y And z. Then write down / remember all three received numbers.
If you know the exact coordinates to move, obtained earlier using the command player.getpos [axis](without brackets), then use the command player.setpos [axis] [number](without brackets) to move to the specified coordinates.
Don't close the console until you run the command 3 times player.setpos [axis] [number](without brackets) for each of the coordinates (x,y,z).
The move only happens after the console is closed.

How to find out the names of locations for the coc command

There are a lot of different locations in the game and I will not lay out the exact commands for teleportation, but I will tell you how to find them. And so, what needs to be done to find out the very names of locations for the team coc:

open console
enter help part_of_name_in_english 0 When entering the name of the location, there should not be spaces, and if they are, enter only the first word.
using console scroll keys [ PageUp] And [ PageDown] find the following lines (there are many):
- CELL: location_name (location id)(all this can be entered for the command coc)
now that we already know the exact name for teleportation to the required location, we enter coc location_name

player.removeallitems- clear inventory. Removes ALL items in your inventory.

prid(without brackets) - select an object by its ID. An analogue to the following action: open the console - click on the object. After this command, the inscription should appear in the console ""(Object ID). After that, you can apply all the cheats written below without selecting the object. With this cheat code, you can select a very distant object and apply the necessary action to it. For example, resurrect someone or view the contents of the inventory.

With the help of these cheats, you can take control of any monster or character. Do everything strictly in the specified sequence.

switch to "third person view" [ F] (will not work otherwise);
we approach the necessary character or monster;
open the console, click on it with the mouse and enter the following code;
player.TC
close the console.

To return to the normal game and take control of your main character, type in the console: TC And player.TC

Notes:

After gaining control over the NPC, you can only move with it and cannot attack.
If you press attack, then your main character will attack, and not the one under your control.
How to make NPCs attack is unknown. If you find a solution to this problem - write in the comments.

Companions (partners)

In Skyrim, almost any character can be made your partner, companion. To do this, do the following:

go to the required character;
open the console and click on it (highlight);
enter setrelationshiprank player 3
enter addfac 0005C84D 1

After that, this character will have a dialogue: “ Follow me. I need your help.»

set playerfollowercount to 0- adds a dialogue for taking new partners. After the introduction of this command, the old partners will continue to follow the player, but you can take another partner. As soon as you take someone else as your partner, the old partner stops following you. If no one is following you, there are no satellites, then this command is useless. The maximum number of partners is 1. It makes no sense to enter something else instead of 0 - it will not give any effect.

Strengthening skills

All of the codes below increase one or another skill by (base value * N%). That is, if your base weapon damage is 15 units, and as the value you entered 200 , then the original damage will be (15 + 15 * 2) = 45 units. To disable modifier as value enter 0 . Exactly the same formula is used to calculate the duration of spells.

Example: player.setav DestructionPowerMod 100- increase damage from all spells of the school of destruction by 100%

OneHandedPowerMod - one-handed weapon
TwoHandedPowerMod - two-handed weapon
MarksmanPowerMod - bows
BlockPowerMod - shield
SmithingPowerMod - blacksmithing
HeavyArmorPowerMod - heavy armor
LightArmorPowerMod - light armor
PickPocketPowerMod - Pickpocketing
LockpickingPowerMod - hack
SneakPowerMod - Stealth
AlchemyPowerMod - alchemy
SpeechcraftPowerMod - eloquence
AlterationPowerMod - change
ConjurationPowerMod - sorcery
DestructionPowerMod - destruction
IllusionPowerMod - illusion
RestorationPowerMod - restoration
EnchantingPowerMod - enchantment

Note. Changes to these modifiers are displayed in the description of spells and weapons.

Remove squares when entering cheat codes

Go to the game folder and find the following file: Skyrim\Data\Interface\ fontconfig.txt. We replace the following line:

map "$ConsoleFont" = "Arial" Normal

map "$ConsoleFont" = "FuturaTCYLigCon" Normal

Note 1. If after that the file fontconfig.txt does not want to save or offers to save a copy of this file, then do the following:

in the properties of this file, see if there is a checkmark " Only reading»;
if it's worth it, remove it, change the file, save it and check this box back.

Note 2. If for some reason you can’t remove the squares in the console, then enter the cheat codes as they are. In this case, you will not see what you enter, but the codes they will work. However, before entering the codes, it is imperative to change the language in the console to English (instructions below).

Set the English language in the console

Method 1- setting the default English language in the OS (instruction).

Method 2- changing game files
Go to C:\Users\<имя_пользователя>\Documents\My Games\ Skyrim and open the file Skyrim.ini. After the lines:

sLanguage=RUSSIAN

add (not replace) the following line

During the game, press the key combination [ Shift]+[Tab]. Right click on your nickname, click change language and select EN.

This method will only work if you have the Steam version of the game.
After these steps, the language in the console Skyrim you will have English instead of Russian.

Note 1. For installation in English in the console, you must follow the instructions described in one of the three methods presented.

Note 2. To set the English language in the console, use "Method 1", as it works for 90% of all players with the original version of the game. If you do not have the original version of the game or the first method did not change the language in the console, provided that you did everything correctly, try the other methods described here.

Once again, "Method 1" works almost always if you have everything in order with the game itself. If it does not work and you are the owner of a non-original version of the game, then you should think about finding another image with the game or purchase the original version.

Pumping all skills and perks

With the help of these cheat codes for Skyrim you can quickly pump all the skills and get all the perks. To do this, we need the following cheats:

advskill N X- raise a skill N on X units of experience. Core team for pumping all skills and perks.
player.setav N X- install X skill level N. This cheat does not add "ability points", but is required when your skill level reaches 100.
player.setlevel N- set character level N(1-255). Can be used to lower a character's level after applying a cheat advskill.

List of names of all skills for teams advskill And player.setav

Usage example:
advskill Destruction 100- raise "Destruction" by 100 experience (not levels)
player.setav Block 50- set skill level 50 "Block"

Alchemy - alchemy
Alteration - change
Conjuration - sorcery
Destruction - destruction
Enchanting - enchantment
Illusion - illusion
Restoration - restoration
Marksman - Shooting
Block - block
HeavyArmor - heavy armor
LightArmor - light armor
Lockpicking - Hacking
Onehanded - one-handed weapon
Twohanded - two-handed weapon
Pickpocket - pickpocketing
Smithing - blacksmithing
Sneak - stealth
Speechcraft - eloquence

To pump all the perks of all skills, do the following (added by dova):

With the help of a cheat advskill(description above) raise any skill to level 100.
Then we apply the code player.setav [skill name] 0(without brackets) - set the level of the specified skill to 0.
Repeat steps 1 and 2 until you have upgraded all the perks.

If after that you still don’t understand how to add “ability points” to level up perks, then enter this several times (in turn):

advskill destruction 999999
player.setav Destruction 0

After these manipulations, you will receive the required number of "ability points" and will be able to spend them on pumping all available in Skyrim perks.

To change the amount of magic, lives and stamina, use the following cheats:

player.setav Health X- set max. number of lives in X units
player.setav Magicka X- set max. amount of magic X units
player.setav Stamina X- set max. amount of stock in X units.

Armor sets (sets)

To get the necessary set of armor, enter the cheat codes in the following form:
player.additem [armor_code] [amount](without brackets).

Example: player.additem 00013938 1- get 1 glass boots

0001396B - armor
0001396A - boots
000D7A8C - boots of fire suppression - +50% fire resistance.
000D7A8B - Boots of Silence - Silent movement.
000D7A8A - mammoth boots - +50 pts. load capacity.
0001396D - helmet
0001396C - gloves
0001396E - shield
000D7AF9 - grounding shield - + 70% resistance to electricity.
000D7AF6 - heat shield - + 70% cold resistance.
0010DFA3 - shield of denial - + 22% magic resistance.

Draconic Shell Armor Set

00013965 - boots
00013966 - armor
00013967 - gloves
00013969 - helmet
00013968 - shield

Draconic Scale Armor Set

0001393D - boots
0001393E - armor
0001393F - gloves
00013940 - helmet
00013941 - shield

Unique armor with bonuses (added by dova)

0007C932 - "The Robe of the Archmage" (armor) - + 100% to the speed of magic recovery; all spells cost 15% less magicka
000F9904 - Scholar's Diadem (helmet) - All spells cost less magicka.
000FC5BF - Bloodlust Thrarch (Shield) - Hitting with a shield deals 3 damage. damage over 5 sec.
000E41D8 - "Shield of Ysgramor" - + 20% magic resistance; +20 pts health.
000295F3 - "Helmet of Yngol" - + 30% resistance to cold.

Accessories with bonuses

000С8911 - "Amulet of Akatosh" - + 25% to the speed of magic recovery
0002D773 - "Goldur's Amulet" - +30 units. magic, health and stamina. (added FANTOM)
00100E65 - "Necklace of immunity and diseases" - 100% immunity to diseases (added nikitadrakon)
000C891B - "Mary's Amulet" - Restoration spells cost 10% less magicka. Essential for a wedding.

Masks (helmets) with bonuses

00061CB9 - "Krosis" - + 20% to hacking, archery and alchemy skills
00061C8B - "Morokey" - + 100% to the speed of magic recovery
00061CA5 - "Nakrin" - spells of the school of destruction and restoration consume 20% less mana; +50 mana
00061CC9 - "Vokun" - spells of the school of illusion, change and witchcraft consume 20% less mana
00061CC2 - "Otar" - resistance to fire, electricity and cold increases
00061CC0 - Ragot - +70 stamina
00061CAB - Volsung - 20% discount on all products; breathing underwater; +70 load capacity
00061CC1 - "Khevnorak" - immunity to diseases and poisons
00061CCA - "Wooden Mask" (added by dova)
00061CD6 - "Konarik" - When health is low, gives a chance to heal the wearer and deal damage to nearby enemies. (added dova)

Weapon sets

To obtain necessary weapon enter cheat codes in the following form:
player.additem [weapon_code] [amount](without brackets).

Example: player.additem 000139A8 1- get 1 glass bow

Daedric Artifact IDs, which are below, must be used in the cheat code as follows:
(without brackets).

Example: player.additem 000240D2 1- get 1 dagger "Razor of Mehrunes"

Weapon

With a cheat code psb"we get all the spells, cries of dragons and talents ”or add only the necessary shouts using the cheat:

player.teachword- learn shout (list of all shout IDs below)
Example: player.teachword20e17- learn the first words of the shout "Fire Breath"

To learn the 3 word of the dragon's cry, you first need to learn 1 and 2, it will not work in another way. To learn "Iceform" level 3, you must enter the following:

player.teachword 602A3- first word
player.teachword 602A4- second
player.teachword 602A5- third

Dragon Shout IDs for code player.teachword(no brackets)
first word / second / third - the name of the cry(use only 1 of 3)

46B89 / 46B8A / 46B8B - Dragon's Call
13E22 / 13E23 / 13E24 - Unrelenting Force
602A3 / 602A4 / 602A5 - Ice mold
6029A / 6029B / 6029C - Thunder Call
20E17 / 20E18 / 20E19 - Fire Breath
48ACA / 48ACB / 48ACC - Time dilation
2F7BB / 2F7BC / 2F7BD - Swift Charge
60291 / 60292 / 60293 - Friendship with animals
3291D / 3291E / 3291F - Elemental Rage
32917 / 32918 / 32919 - Ethereal
5D16C / 5D16D / 5D16E - Frost Breath
602A0 / 602A1 / 602A2 - Voice cast
5FB95 / 5FB96 / 5FB97 - Disarmament
3CD31 / 3DC32 / 3CD33 - Clear Sky
51960 / 51961 / 51962 - Call of Valor
44251 / 44252 / 44253 - Dragonslayer
60297 / 60298 / 60299 - Death sentence
60294 / 60295 / 60296 - Aura Whisper
6029D / 6029E / 6029F - Kin World
3291A / 3291B / 3291C - Fright

Shouts DLC Dawnguard

02008A65 / 02008A64 / 02008A63 - Life Drain
020030D4 / 020030D6 / 020030D7 - Calling Durnevir
02007CB7 / 02007CB8 / 02007CB9 - Soul Rip
0201A162 / 0201A163 / 0201A164 - Call from Soul Cairn

Shouts DLC Dragonborn

040200E4 / 040200E5 / 040200E6 - Battle Fury
040179D9 / 040179DA / 040179DB - Submission of will
040200C2 / 040200C3 / 040200C4 - Cyclone
0401DF93 / 0401DF94 / 0401DF95 - Dragon Incarnate

To use Dragon Shouts First you need to activate them with Soul of dragons. That is, kill the dragon or add the required amount using the cheat:

player.modav dragonsouls N- get N soul of dragons. This cheat sets the total number of dragon souls consumed, and does not add N PC.

For activation of dragon cries press [ Tab] -- Magic -- screams-- select the necessary shout that you want to activate -- press [ R] -- Ok. Now you can use this shout.

player.setav shoutrecoverymult 0- Dragon Shouts have no cooldown, cooldown to reuse. If you entered this code after using cry, then it will be necessary to wait until it recovers, after which it will be possible to use this shout all the time without waiting for it to recover.

Ingredients, Soul Stones, Potions, Arrows

To get the required item, whose IDs are below, you must use the cheat code in the following form:
player.additem [number](without brackets).

Example: player.additem 00039BE5 10- get 10 potions of full health restoration

00039BE5 - fully restores health
00039BE7 - fully restores magic
00039CF3 - fully restores stamina
00073F34 - "Deadly Poison" - 65 units. poison damage
00039D12 - Enchanter's Elixir
00039967 - "Blacksmith's Elixir"

Soul Stones

0002E4F4 - large (empty)
0002E4FB - large (Large)
0002E4FC - great (empty)
0002E4FF - great (Great)
0002E500 - black (blank)
0002E504 - black (Great)
00063B27 - Star of Azura (blank)
00063B29 - Azura's Black Star (blank)

Arrows

00038341 - Falmer
00034182 - ancient nordic
000236DD - dart (can only be obtained after completing the main storyline)
00020F02 - rusty iron
00020DDF - iron
000139C0 - Daedric
000139BF - ebonite
000139BE - glass
000139BD - elven
000139BC - Dwemer
000139BB - orcs
0001397F - steel

Full list ingredients Skyrim you will find .

Treasure chests

Each of the chests contains all the items of its class. For example, a stave chest contains ALL staves, while an ingredient chest contains ALL ingredients. To get these treasure chests, use the following cheat codes for Skyrim:
player.placeatme(no brackets)

Example: player.placeatme 000C2CDE- get a chest with all staves

000C2CDF - enchanted weapon
000C2CD7 - enchanted armor, jewelry, mage and rogue clothes
000C2CE0 - standard weapon
000C2CD6 - standard armor
000C2CDE - staves
000C2CD8 - armor and jewelry, clothes for a mage and a robber
0010D9FF - skill books
000C2CD9 - spell books
000C2D3B - regular books
000C2CD4 - arrows
000C2CDA - ingredients
000C2CDB - keys
000C2CE1 - spell scrolls
000C2CE2 - potions, elixirs and tinctures

Notes:

After opening some chests (with enchanted weapons and armor), Skyrim freezes for 30-60 seconds. (depending on the power of your CPU). Wait a while and everything will be fine.
If, after opening a chest with an enchanted weapon/armor, instead of any one item, press [ R] (take all), then the duration of the freeze will be reduced several times.
Chests contain all the items of their class - there are a lot of things.
Each chest contains only 1 copy of each item. If you want to make a lot of such items (ingredients) - find out its ID of the item (read how to do it below) and create the required number of these things using the cheat player.additem ID number

Passage of quests

To complete quests in Skyrim we need the following cheat codes:

showquesttargets- shows ID of active quest
getstage(without brackets) - shows the stage of completion of the specified quest (the resulting number is not % completed).
setstage [stage](without brackets) - set the stage of execution
movetoqt(without brackets) - teleportation to the key point (the last unfinished stage) of the specified task. (added by Robin)
sqs(without brackets) - show a list of all stages of the active quest (they are different for each quest). Used in cheat setstage.
resetquest(without brackets) - reset all stages of the quest, after which it will be possible to go through it again. In order for this quest to be removed from the Quest Log, you must save and load the game.
player.completequest(without brackets) - complete the quest. This command is not recommended., since you won't be able to get the next quest if it's a quest chain. Use only if you want to complete the quest without the possibility of further progress.

And so, all the necessary console commands for successful completion quests in Skyrim, we already know, but what and why to introduce - no. Since we will perform all actions in the console, I want to remind you that to scroll the text in the console, you must use the keys [ PageUp] And [ PageDown]. The method written below describes how to move from one stage of the quest to another.

Save the game and do not overwrite this save until you complete the quest.
Open your task list (key [ J])
Select the required quest you want to complete and make it active - press [ Enter].
Open the console and enter showquesttargets- we get Quest ID.
In the resulting list, we are looking for Current quest: Quest ID -- remember/write down this ID.
Now we enter movetoqt quest ID and trying to pass the quest in the usual way, without a console, and if nothing comes out, read on.
Enter in console getstage quest ID After that, the stage of completing this quest will appear in the console in the following form: GetStage >> [number].00 -- memorize / write down this number.Now we need to find out what stage of the quest comes after this one obtained using the command getstage.
Enter in console sqs(without brackets) - we get a list of all stages of the specified quest (for each quest they are different) in the following form Stage [stage]: 1(or 0). 1 - indicates that this stage has already been passed, and 0 - not yet.
In the resulting list, we are looking for our quest stage, obtained using the command getstage, and look at what stage comes after it - remember / write down the number. For example, if using getstage You received GetStage >> 400.00, and in the list obtained using the code sqs, after the line Stage 400: 1 there is a line Stage 450: 0- memorize / write down the number 450 .
Enter in console setstage [stage](without brackets) - set the stage of the quest. As a stage, we enter the number obtained in the previous paragraph (we have this 450 ), and as the quest ID - the ID obtained using the cheat showquesttargets.
Enter movetoqt(without brackets) - teleportation to the target of the active task.
We continue to pass the next stage of the quest.

Notes:

If nothing worked the first time, repeat the steps 9 And 10 several times, but change stage- enter the next in the list obtained using the command sqs(without brackets).
If you repeat the points 9 And 10 , while changing stage quest (all in turn) from the one received using the command sqs(without brackets) to the last in the list sqs(without brackets), then you will complete all the stages of this quest and will move from one key point to another. The move will not always happen. That's how you can complete any quest 100%.
It is not necessary to go exactly to the next stage of the quest, you can go directly to the last one, but in this case you may not receive the next quest, since you will not have an active quest or a point for teleportation by the command movetoqt- you won't know where to get it (next quest).
If you go directly to the last stage, then you may not receive all the rewards for this quest (not tested).
You cannot activate the previous stage of the quest (I did not succeed).

How to find out the name of a quest by its ID

Method 1- the fastest, but may not work if you have some mods or unofficial add-ons installed.

Go to this page and enter the name of the quest in the appropriate search form.

Method 2- slow, but always works with any version of the game.

If after entering the command showquesttargets you have multiple lines Current quest: Quest ID and you do not know which of these IDs corresponds to this or that quest - do the following:

type in console help quest ID 4
in the resulting list look for the string QUST: quest ID (some ID) "Quest name"
repeat steps 1 and 2 until you find the quest you need by its name.

Quest IDs, after introduction showquesttargets, are located in exactly the same sequence as in the "Job Log". That is, if in the "Journal of tasks" at the very top of the list you have the quest "It's restless in Skyrim", and after it comes "Cleaning", then they will be in exactly the same sequence after entering the command showquesttargets. This will help make it even faster to sort through all the quest IDs, since you will approximately know which ID to start searching for the quest you need.

How to find the ID of an item

If you have some unique item and want to make a lot of such items (clone) or want to "send" this item to your friend, but don't know how to do it. To do this, we need to know the ID of this item.

Method 1
In the console enter: player.showinventory

Note. This method always works, but if you have too many items in your inventory, it may be difficult to find the item you need. In such cases, use the second method.

Method 2(added Avenger)
We put the item whose ID you need to find out in an empty box (barrel, chest, bag or something else). We approach the box as close as possible (preferably sit down) - open the console - click on the box (in which our item lies) and enter the command inv.

Notes:

This method may not always work, because when you click on a box with an item, the box itself is not always selected, very often it is not clear what is highlighted.
If you can't find the item ID using this method, use the first method.
With this method, you can see list of all other character's items. To do this, instead of clicking on the box, click on the required character.

After that, a list of all items in your inventory or box will appear (if you entered the command inv) in the following form:
quantity - name (item ID)

To scroll through the text in the console, if there is a lot of it, use the [ Page Up] And [ Page Down].

We are looking for the necessary item by name and look Item ID
Now, to make a lot of such items (clone), we enter the following code:

player.additem [number](no brackets)

Housing

Many of you have your own home or place where you like to spend time, but when you need to create some thing (armor, weapons), improve or create something new elixir- you have to look for special devices to create it, because without it there is no way. With the help of these codes for Skyrim, you can create your own workplace, install all the devices you need, anywhere and anytime. To install all these crafting machines, use the following code to Skyrim:
player.placeatme(without brackets) - set item

Example: player.placeatme 000BBCF1- install sky forge

000BAD0D - pentagram of souls (large)
000D5501 - pentagram of souls (small)
000BAD0C - alchemy laboratory (large)
000D54FF - alchemy laboratory (small)
000727A1 - leather tanning machine
0006E9C2 - whetstone
000BF9E1 - forge (large)
000BBCF1 - sky forge (very large)
0001A2AD - anvil
0009C6CE - smelter
000D932F - workbench

Furniture for home

00089A85 - mannequin

single door: CC16A, CC163
CC164 - double door

decorative items

B2456 - dragon head
3FA65 - elk antlers
D9285 - crab
D9276 - goat's head
3858F - fish
moose head: DD9E0, DD9E1, CF264
big cat head: D928F, D928D
wolf head: D9289, D9288
the head of some animal: D9287, D927D
bear head: D8282, D9281, D927F

carpets (square): 93D39, 93D3B, 93D3D, 93D3F, 93D41, 93D43, 93D45, 93D47, B7E3E, B7E40, BF9CF, BF9D1, BF9D3, BF9D5
carpets (round): 95498, 954A3, 954A4, 954A5
animal skins: 5C015, 5C016, 5C017

7EA42 - wall burning candles
1F24A - table candle
5AD5B - ceiling light

77761 - light source(invisible, cannot be selected/moved/deleted after installation) for illuminating dark rooms. To install multiple lights at the same time, use player.placeatme 77761 N- install N light sources. Instead of N write any number from 1 before 10 . If you write more 10 - Nothing will happen.
blue light source: FFF46, FFF48

Notes:

When created, all items appear in front of you.
To set the item "flat" before introducing the cheat, center your gaze so that your character is looking straight ahead, not up or down.

activate(without brackets) - activate the specified item. Key analog [ E]. Applies to mannequins (dress) and bookshelves (close/open).

For the following commands to work, you must first select the object - open the console and click on the object. After that, an inscription should appear in the middle of the console screen ""(Object ID). All the objects you create have an ID that starts with FF000..., so watch what you highlight.

Mannequin Codes

With the help of these cheat codes to Skyrim you can enchant (improve) any weapon, armor or jewelry. Before you begin the improvement process, you need to know the following:

you can improve only the item that does not have any improvements;
each item can have no more than 2 enchantments;
the quality (strength) of enchantment depends on the Enchantment skill;
before enchanting, it is recommended to upgrade the Enchantment skill to 100 along with its perks (read how to do this in the section “Leveling all skills and perks”);
after entering the code for enchantment (improvement), the specified item will appear in your inventory, that is, it will be added new item, and the item in the inventory will not be improved;
after enchanting (improving) a weapon, it will have a very small charge (170-350);
to increase the charge, equip the necessary weapon whose charge you want to increase, and apply the following cheat codes:
- player.setav LeftitemCharge N- load the weapon in the left hand on N charges
- player.setav RightitemCharge N- load the weapon in the right hand on N charges
list of ID of all items you can find

To open the console press [ ~ ] (tilde) and enter the following cheat codes:

Main list of cheat codes

tgm - invulnerability mode
tcl - walk through walls
tmm 1 - open the world map (all points on the map)
killall - kill all (friends/enemies) in line of sight
psb - get all spells, dragon calls and talents
qqq - exit the game
advlevel - raise the level. Does not add ability points.
tfc - "free" camera mode
tdetect - theft without consequences. Turn off NPC vision. (added by Robin)
tcai - disables and enables artificial intelligence. Once cast, everyone stops fighting. (added by Robin)
set timescale to 0 - stop time. Default: 20. If you enter 10000 instead of 0, then one day will pass in a few seconds.

player.setav invisibility 1 - enable invisibility. After that, neither enemies nor friends will notice you. To disable invisibility, enter 0 instead of 1.

player.setav Health X X units
player.setav Magicka X X units
player.setav Stamina X- set max. the amount of power in X units. If set to a high value, the character will not get tired while running.

player.setav LeftItemCharge N N units
player.setav RightItemCharge N N units
Notes:

all two-handed weapons are considered weapons in the right hand;
a fully loaded weapon has a charge level of about 3000;
each attack consumes about 30 units. weapon charge;
charge level can be set above 3000.

player.additem 0000000F N- get N gold
player.additem 0000000A N- get N master keys
player.placeatme 0010BF90 - Summon a Spectral Horse. Can be used indoors. (added Sam)

player.setcrimegold 0 - Remove the bounty on your head

Vampirism

player.addspell 000B8780- vampirism. Adds the Sanguinare Vampiris disease. 3 days after infection, you have a 10% chance that you will become a vampire. If after 3 days after using this code in the section "Magic" - "Active Effects" appears "Vulnerability to fire" - you are a vampire. And if nothing happened - use the command player.removespell 000B8780, after which again player.addspell 000B8780.
player.removespell 000B8780- will be cured of vampirism, the disease "Sangvinare Vampiris", which appears at the first stage of transformation (after a bite). After turning into a vampire, this code does not work.
setstage 000EAFD5 10- recover from vampirism. Always heals, but only works 1 time as healing happens after the quest is completed (this code ends the quest). (added 216623)

If you become a vampire for the second time and code setstage does not cure

save the game (new save, not quick save);
enter resetquest 000EAFD5
create another one new save and download it;
enter setstage 000EAFD5 10

Teleportation

player.moveto(without brackets) - teleport to the specified object (character)
coc qasmoke- will move to the test location. There are all game items and devices for the manufacture of any items. (added by Robin)
coc riverwood- exit the test location, move to "Riverwood". If you enter another name instead of "riverwood", then a teleport to the specified location will occur. How to find out the names of locations for teleportation, read a little below. (added by Robin)
player.setpos [axis] [number](without brackets) - move your character to the specified coordinates. Instead of axis you must specify x,y or z. And instead numbers- offset along the selected axis.

Notes for player.setpos [axis] [number](no brackets)

To find out your current location, enter player.getpos [axis](without brackets). This command needs to be run 3 times and instead of axis take turns writing x,y And z. Then write down / remember all three received numbers.
If you know the exact coordinates to move, obtained earlier using the command player.getpos [axis](without brackets), then use the command player.setpos [axis] [number](without brackets) to move to the specified coordinates.
Don't close the console until you run the command 3 times player.setpos [axis] [number](without brackets) for each of the coordinates (x,y,z).
The move only happens after the console is closed.

How to find out the names of locations for the coc command

open console
enter help part_of_name_in_english 0 When entering the name of the location, there should not be spaces, and if they are, enter only the first word.
using console scroll keys [ PageUp] And [ PageDown] find the following lines (there are many):
- CELL: location_name (location id)(all this can be entered for the command coc)
now that we already know the exact name for teleportation to the required location, we enter coc location_name

player.removeallitems- clear inventory. Removes ALL items in your inventory.

With the help of these cheats, you can take control of any monster or character. Do everything strictly in the specified sequence.

switch to "third person view" [ F] (will not work otherwise);
we approach the necessary character or monster;
open the console, click on it with the mouse and enter the following code;
player.TC
close the console.

To return to the normal game and take control of your main character, type in the console: TC And player.TC

Notes:

After gaining control over the NPC, you can only move with it and cannot attack.
If you press attack, then your main character will attack, and not the one under your control.
How to make NPCs attack is unknown. If you find a solution to this problem - write in the comments.

Companions (partners)

In Skyrim, almost any character can be made your partner, companion. To do this, do the following:

go to the required character;
open the console and click on it (highlight);
enter setrelationshiprank player 3
enter addfac 0005C84D 1

After that, this character will have a dialogue: “ Follow me. I need your help.»

Strengthening skills

Example: player.setav DestructionPowerMod 100- increase damage from all spells of the school of destruction by 100%

OneHandedPowerMod - one-handed weapon
TwoHandedPowerMod - two-handed weapon
MarksmanPowerMod - bows
BlockPowerMod - shield
SmithingPowerMod - blacksmithing
HeavyArmorPowerMod - heavy armor
LightArmorPowerMod - light armor
PickPocketPowerMod - Pickpocketing
LockpickingPowerMod - hack
SneakPowerMod - Stealth
AlchemyPowerMod - alchemy
SpeechcraftPowerMod - eloquence
AlterationPowerMod - change
ConjurationPowerMod - sorcery
DestructionPowerMod - destruction
IllusionPowerMod - illusion
RestorationPowerMod - restoration
EnchantingPowerMod - enchantment

Note. Changes to these modifiers are displayed in the description of spells and weapons.

Remove squares when entering cheat codes

Go to the game folder and find the following file: Skyrim\Data\Interface\ fontconfig.txt. We replace the following line:

map "$ConsoleFont" = "Arial" Normal

map "$ConsoleFont" = "FuturaTCYLigCon" Normal

Note 1. If after that the file fontconfig.txt does not want to save or offers to save a copy of this file, then do the following:

in the properties of this file, see if there is a checkmark " Only reading»;
if it's worth it, remove it, change the file, save it and check this box back.

Set the English language in the console

Method 1- setting the default English language in the OS (instruction).

Method 2- changing game files
Go to C:\Users\<имя_пользователя>\Documents\My Games\ Skyrim and open the file Skyrim.ini. After the lines:

sLanguage=RUSSIAN

add (not replace) the following line

During the game, press the key combination [ Shift]+[Tab]. Right click on your nickname, click change language and select EN.

This method will only work if you have the Steam version of the game.
After these steps, the language in the console Skyrim you will have English instead of Russian.

Note 1. To set the English language in the console, you must follow the instructions described in one of the three methods presented.

Pumping all skills and perks

With the help of these cheat codes for Skyrim you can quickly pump all the skills and get all the perks. To do this, we need the following cheats:

advskill N X- raise a skill N on X units of experience. The main team for pumping all skills and perks.
player.setav N X- install X skill level N. This cheat does not add "ability points", but is required when your skill level reaches 100.
player.setlevel N- set character level N(1-255). Can be used to lower a character's level after applying a cheat advskill.

List of names of all skills for teams advskill And player.setav

Usage example:
advskill Destruction 100- raise "Destruction" by 100 experience (not levels)
player.setav Block 50- set skill level 50 "Block"

Alchemy - alchemy
Alteration - change
Conjuration - sorcery
Destruction - destruction
Enchanting - enchantment
Illusion - illusion
Restoration - restoration
Marksman - Shooting
Block - block
HeavyArmor - heavy armor
LightArmor - light armor
Lockpicking - Hacking
Onehanded - one-handed weapon
Twohanded - two-handed weapon
Pickpocket - pickpocketing
Smithing - blacksmithing
Sneak - stealth
Speechcraft - eloquence

To pump all the perks of all skills, do the following (added by dova):

With the help of a cheat advskill(description above) raise any skill to level 100.
Then we apply the code player.setav [skill name] 0(without brackets) - set the level of the specified skill to 0.
Repeat steps 1 and 2 until you have upgraded all the perks.

If after that you still don’t understand how to add “ability points” to level up perks, then enter this several times (in turn):

advskill destruction 999999
player.setav Destruction 0

After these manipulations, you will receive the required number of "ability points" and will be able to spend them on pumping all available in Skyrim perks.

To change the amount of magic, lives and stamina, use the following cheats:

player.setav Health X- set max. number of lives in X units
player.setav Magicka X- set max. amount of magic X units
player.setav Stamina X- set max. amount of stock in X units.

Armor sets (sets)

To get the necessary set of armor, enter the cheat codes in the following form:
player.additem [armor_code] [amount](without brackets).

Example: player.additem 00013938 1- get 1 glass boots

0001396B - armor
0001396A - boots
000D7A8C - boots of fire suppression - +50% fire resistance.
000D7A8B - Boots of Silence - Silent movement.
000D7A8A - mammoth boots - +50 pts. load capacity.
0001396D - helmet
0001396C - gloves
0001396E - shield
000D7AF9 - grounding shield - + 70% resistance to electricity.
000D7AF6 - heat shield - + 70% cold resistance.
0010DFA3 - shield of denial - + 22% magic resistance.

Draconic Shell Armor Set

00013965 - boots
00013966 - armor
00013967 - gloves
00013969 - helmet
00013968 - shield

Draconic Scale Armor Set

0001393D - boots
0001393E - armor
0001393F - gloves
00013940 - helmet
00013941 - shield

Unique armor with bonuses (added by dova)

0007C932 - "The Robe of the Archmage" (armor) - + 100% to the speed of magic recovery; all spells cost 15% less magicka
000F9904 - Scholar's Diadem (helmet) - All spells cost less magicka.
000FC5BF - Bloodlust Thrarch (Shield) - Hitting with a shield deals 3 damage. damage over 5 sec.
000E41D8 - "Shield of Ysgramor" - + 20% magic resistance; +20 pts health.
000295F3 - "Helmet of Yngol" - + 30% resistance to cold.

Accessories with bonuses

000С8911 - "Amulet of Akatosh" - + 25% to the speed of magic recovery
0002D773 - "Goldur's Amulet" - +30 units. magic, health and stamina. (added FANTOM)
00100E65 - "Necklace of immunity and diseases" - 100% immunity to diseases (added nikitadrakon)
000C891B - "Mary's Amulet" - Restoration spells cost 10% less magicka. Essential for a wedding.

Masks (helmets) with bonuses

00061CB9 - "Krosis" - + 20% to hacking, archery and alchemy skills
00061C8B - "Morokey" - + 100% to the speed of magic recovery
00061CA5 - "Nakrin" - spells of the school of destruction and restoration consume 20% less mana; +50 mana
00061CC9 - "Vokun" - spells of the school of illusion, change and witchcraft consume 20% less mana
00061CC2 - "Otar" - resistance to fire, electricity and cold increases
00061CC0 - Ragot - +70 stamina
00061CAB - Volsung - 20% discount on all products; breathing underwater; +70 load capacity
00061CC1 - "Khevnorak" - immunity to diseases and poisons
00061CCA - "Wooden Mask" (added by dova)
00061CD6 - "Konarik" - When health is low, gives a chance to heal the wearer and deal damage to nearby enemies. (added dova)

Weapon sets

To get the necessary weapon, enter the cheat codes in the following form:
player.additem [weapon_code] [amount](without brackets).

Example: player.additem 000139A8 1- get 1 glass bow

Daedric Artifact IDs, which are below, must be used in the cheat code as follows:
(without brackets).

Example: player.additem 000240D2 1- get 1 dagger "Razor of Mehrunes"

Weapon

With a cheat code psb"we get all the spells, cries of dragons and talents ”or add only the necessary shouts using the cheat:

player.teachword- learn shout (list of all shout IDs below)
Example: player.teachword20e17- learn the first words of the shout "Fire Breath"

To learn the 3 word of the dragon's cry, you first need to learn 1 and 2, it will not work in another way. To learn "Iceform" level 3, you must enter the following:

player.teachword 602A3- first word
player.teachword 602A4- second
player.teachword 602A5- third

Dragon Shout IDs for code player.teachword(no brackets)
first word / second / third - the name of the cry(use only 1 of 3)

46B89 / 46B8A / 46B8B - Dragon's Call
13E22 / 13E23 / 13E24 - Unrelenting Force
602A3 / 602A4 / 602A5 - Ice mold
6029A / 6029B / 6029C - Thunder Call
20E17 / 20E18 / 20E19 - Fire Breath
48ACA / 48ACB / 48ACC - Time dilation
2F7BB / 2F7BC / 2F7BD - Swift Charge
60291 / 60292 / 60293 - Friendship with animals
3291D / 3291E / 3291F - Elemental Rage
32917 / 32918 / 32919 - Ethereal
5D16C / 5D16D / 5D16E - Frost Breath
602A0 / 602A1 / 602A2 - Voice cast
5FB95 / 5FB96 / 5FB97 - Disarmament
3CD31 / 3DC32 / 3CD33 - Clear Sky
51960 / 51961 / 51962 - Call of Valor
44251 / 44252 / 44253 - Dragonslayer
60297 / 60298 / 60299 - Death sentence
60294 / 60295 / 60296 - Aura Whisper
6029D / 6029E / 6029F - Kin World
3291A / 3291B / 3291C - Fright

Shouts DLC Dawnguard

02008A65 / 02008A64 / 02008A63 - Life Drain
020030D4 / 020030D6 / 020030D7 - Calling Durnevir
02007CB7 / 02007CB8 / 02007CB9 - Soul Rip
0201A162 / 0201A163 / 0201A164 - Call from Soul Cairn

Shouts DLC Dragonborn

040200E4 / 040200E5 / 040200E6 - Battle Fury
040179D9 / 040179DA / 040179DB - Submission of will
040200C2 / 040200C3 / 040200C4 - Cyclone
0401DF93 / 0401DF94 / 0401DF95 - Dragon Incarnate

To use Dragon Shouts First you need to activate them with Soul of dragons. That is, kill the dragon or add the required amount using the cheat:

player.modav dragonsouls N- get N soul of dragons. This cheat sets the total number of dragon souls consumed, and does not add N PC.

For activation of dragon cries press [ Tab] -- Magic -- screams-- select the necessary shout that you want to activate -- press [ R] -- Ok. Now you can use this shout.

Ingredients, Soul Stones, Potions, Arrows

To get the required item, whose IDs are below, you must use the cheat code in the following form:
player.additem [number](without brackets).

Example: player.additem 00039BE5 10- get 10 potions of full health restoration

00039BE5 - fully restores health
00039BE7 - fully restores magic
00039CF3 - fully restores stamina
00073F34 - "Deadly Poison" - 65 units. poison damage
00039D12 - Enchanter's Elixir
00039967 - "Blacksmith's Elixir"

Soul Stones

0002E4F4 - large (empty)
0002E4FB - large (Large)
0002E4FC - great (empty)
0002E4FF - great (Great)
0002E500 - black (blank)
0002E504 - black (Great)
00063B27 - Star of Azura (blank)
00063B29 - Azura's Black Star (blank)

Arrows

00038341 - Falmer
00034182 - ancient nordic
000236DD - dart (can only be obtained after completing the main storyline)
00020F02 - rusty iron
00020DDF - iron
000139C0 - Daedric
000139BF - ebonite
000139BE - glass
000139BD - elven
000139BC - Dwemer
000139BB - orcs
0001397F - steel

Full list of ingredients Skyrim you will find .

Treasure chests

Example: player.placeatme 000C2CDE- get a chest with all staves

000C2CDF - enchanted weapon
000C2CD7 - enchanted armor, jewelry, mage and rogue clothes
000C2CE0 - standard weapon
000C2CD6 - standard armor
000C2CDE - staves
000C2CD8 - armor and jewelry, clothes for a mage and a robber
0010D9FF - skill books
000C2CD9 - spell books
000C2D3B - regular books
000C2CD4 - arrows
000C2CDA - ingredients
000C2CDB - keys
000C2CE1 - spell scrolls
000C2CE2 - potions, elixirs and tinctures

Notes:

After opening some chests (with enchanted weapons and armor), Skyrim freezes for 30-60 seconds. (depending on the power of your CPU). Wait a while and everything will be fine.
If, after opening a chest with an enchanted weapon/armor, instead of any one item, press [ R] (take all), then the duration of the freeze will be reduced several times.
Chests contain all the items of their class - there are a lot of things.
Each chest contains only 1 copy of each item. If you want to make a lot of such items (ingredients) - find out its ID of the item (read how to do it below) and create the required number of these things using the cheat player.additem ID number

Passage of quests

To complete quests in Skyrim we need the following cheat codes:

showquesttargets- shows ID of active quest
getstage(without brackets) - shows the stage of completion of the specified quest (the resulting number is not % completed).
setstage [stage](without brackets) - set the stage of execution
movetoqt(without brackets) - teleportation to the key point (the last unfinished stage) of the specified task. (added by Robin)
sqs(without brackets) - show a list of all stages of the active quest (they are different for each quest). Used in cheat setstage.
resetquest(without brackets) - reset all stages of the quest, after which it will be possible to go through it again. In order for this quest to be removed from the Quest Log, you must save and load the game.
player.completequest(without brackets) - complete the quest. This command is not recommended., since you won't be able to get the next quest if it's a quest chain. Use only if you want to complete the quest without the possibility of further progress.

And so, we already know all the necessary console commands for the successful completion of quests in Skyrim, but what and why to enter is not. Since we will perform all actions in the console, I want to remind you that to scroll the text in the console, you must use the keys [ PageUp] And [ PageDown]. The method written below describes how to move from one stage of the quest to another.

Save the game and do not overwrite this save until you complete the quest.
Open your task list (key [ J])
Select the required quest you want to complete and make it active - press [ Enter].
Open the console and enter showquesttargets- we get Quest ID.
In the resulting list, we are looking for Current quest: Quest ID -- remember/write down this ID.
Now we enter movetoqt quest ID and try to complete the quest in the usual way, without the console, and if nothing comes out, read on.
Enter in console getstage quest ID After that, the stage of completing this quest will appear in the console in the following form: GetStage >> [number].00 -- memorize / write down this number.Now we need to find out what stage of the quest comes after this one obtained using the command getstage.
Enter in console sqs(without brackets) - we get a list of all stages of the specified quest (for each quest they are different) in the following form Stage [stage]: 1(or 0). 1 - indicates that this stage has already been passed, and 0 - not yet.
In the resulting list, we are looking for our quest stage, obtained using the command getstage, and look at what stage comes after it - remember / write down the number. For example, if using getstage You received GetStage >> 400.00, and in the list obtained using the code sqs, after the line Stage 400: 1 there is a line Stage 450: 0- memorize / write down the number 450 .
Enter in console setstage [stage](without brackets) - set the stage of the quest. As a stage, we enter the number obtained in the previous paragraph (we have this 450 ), and as the quest ID - the ID obtained using the cheat showquesttargets.
Enter movetoqt(without brackets) - teleportation to the target of the active task.
We continue to pass the next stage of the quest.

Notes:

If nothing worked the first time, repeat the steps 9 And 10 several times, but change stage- enter the next in the list obtained using the command sqs(without brackets).
If you repeat the points 9 And 10 , while changing stage quest (all in turn) from the one received using the command sqs(without brackets) to the last in the list sqs(without brackets), then you will complete all the stages of this quest and will move from one key point to another. The move will not always happen. That's how you can complete any quest 100%.
It is not necessary to go exactly to the next stage of the quest, you can go directly to the last one, but in this case you may not receive the next quest, since you will not have an active quest or a point for teleportation by the command movetoqt- you won't know where to get it (next quest).
If you go directly to the last stage, then you may not receive all the rewards for this quest (not tested).
You cannot activate the previous stage of the quest (I did not succeed).

How to find out the name of a quest by its ID

Method 1- the fastest, but may not work if you have some mods or unofficial add-ons installed.

Go to this page and enter the name of the quest in the appropriate search form.

Method 2- slow, but always works with any version of the game.

If after entering the command showquesttargets you have multiple lines Current quest: Quest ID and you do not know which of these IDs corresponds to this or that quest - do the following:

type in console help quest ID 4
in the resulting list look for the string QUST: quest ID (some ID) "Quest name"
repeat steps 1 and 2 until you find the quest you need by its name.

How to find the ID of an item

If you have some unique item and want to make a lot of such items (clone) or want to "send" this item to your friend, but don't know how to do it. To do this, we need to know the ID of this item.

Method 1
In the console enter: player.showinventory

Note. This method always works, but if you have too many items in your inventory, it may be difficult to find the item you need. In such cases, use the second method.

Notes:

This method may not always work, because when you click on a box with an item, the box itself is not always selected, very often it is not clear what is highlighted.
If you can't find the item ID using this method, use the first method.
With this method, you can see list of all other character's items. To do this, instead of clicking on the box, click on the required character.

After that, a list of all items in your inventory or box will appear (if you entered the command inv) in the following form:
quantity - name (item ID)

To scroll through the text in the console, if there is a lot of it, use the [ Page Up] And [ Page Down].

We are looking for the necessary item by name and look Item ID
Now, to make a lot of such items (clone), we enter the following code:

player.additem [number](no brackets)

Housing

Many of you have your own home or a place where you like to spend time, but when you need to create some thing (armor, weapon), improve something or create a new elixir, you have to look for special devices to create it, because without no way. With the help of these codes for Skyrim, you can create your own workplace, install all the devices you need, anywhere and anytime. To install all these crafting machines, use the following code to Skyrim:
player.placeatme(without brackets) - set item

Example: player.placeatme 000BBCF1- install sky forge

000BAD0D - pentagram of souls (large)
000D5501 - pentagram of souls (small)
000BAD0C - alchemy laboratory (large)
000D54FF - alchemy laboratory (small)
000727A1 - leather tanning machine
0006E9C2 - whetstone
000BF9E1 - forge (large)
000BBCF1 - sky forge (very large)
0001A2AD - anvil
0009C6CE - smelter
000D932F - workbench

Furniture for home

00089A85 - mannequin

single door: CC16A, CC163
CC164 - double door

decorative items

B2456 - dragon head
3FA65 - elk antlers
D9285 - crab
D9276 - goat's head
3858F - fish
moose head: DD9E0, DD9E1, CF264
big cat head: D928F, D928D
wolf head: D9289, D9288
the head of some animal: D9287, D927D
bear head: D8282, D9281, D927F

carpets (square): 93D39, 93D3B, 93D3D, 93D3F, 93D41, 93D43, 93D45, 93D47, B7E3E, B7E40, BF9CF, BF9D1, BF9D3, BF9D5
carpets (round): 95498, 954A3, 954A4, 954A5
animal skins: 5C015, 5C016, 5C017

7EA42 - wall burning candles
1F24A - table candle
5AD5B - ceiling light

77761 - light source(invisible, cannot be selected/moved/deleted after installation) for illuminating dark rooms. To install multiple lights at the same time, use player.placeatme 77761 N- install N light sources. Instead of N write any number from 1 before 10 . If you write more 10 - Nothing will happen.
blue light source: FFF46, FFF48

Notes:

When created, all items appear in front of you.
To set the item "flat" before introducing the cheat, center your gaze so that your character is looking straight ahead, not up or down.

activate(without brackets) - activate the specified item. Key analog [ E]. Applies to mannequins (dress) and bookshelves (close/open).

Mannequin Codes

With the help of these cheat codes to Skyrim you can enchant (improve) any weapon, armor or jewelry. Before you begin the improvement process, you need to know the following:

you can improve only the item that does not have any improvements;
each item can have no more than 2 enchantments;
the quality (strength) of enchantment depends on the Enchantment skill;
before enchanting, it is recommended to upgrade the Enchantment skill to 100 along with its perks (read how to do this in the section “Leveling all skills and perks”);
after entering the code for enchantment (improvement), the specified item will appear in your inventory, that is, a new item will be added, and the item in the inventory will not be improved;
after enchanting (improving) a weapon, it will have a very small charge (170-350);
to increase the charge, equip the necessary weapon whose charge you want to increase, and apply the following cheat codes:
- player.setav LeftitemCharge N- load the weapon in the left hand on N charges
- player.setav RightitemCharge N- load the weapon in the right hand on N charges
list of ID of all items you can find

TheEldersScrolls:skyrim- big game with a wide range of possibilities. In the game, you can open the console and enter any code that will greatly simplify the gameplay or open up new options for the player. In addition, you can customize any setting to suit your preferences.

How to enter codes correctly so that they work in the game:

To activate game console we have to press the "~" (tilde) key.
In the window that appears, we enter the required code (all available and useful commands you can find in our article).
After pressing the Enter key, the code is activated in the game.
The console closes after pressing "Esc".

Correct entry of cheat codes

When entering any code, the user must remember that all commands are absolutely not sensitive to case, so it doesn’t matter with a capital letter or a small one, the code will be written. In some commands, you may notice the presence of square brackets. This means that instead of them, the player needs to enter any value they need. The brackets themselves do not need to be written, only the number.

Basic codes:

tcl - you can pass through any obstacles, even walls.
tgm - complete immortality.
tmm 1 - all locations on the map become available for fast movement.
psb - The player gets all spells, dragon calls and talents.
killall - kill all NPCs around the hero.
qqq - exit the game to the desktop.
advlevel - get a level, but only without additional abilities.
tfc - free camera mode.
tdetect - you can freely steal: NPCs will not react to the player.
tcai - disables the AI of opponents and friendly creatures.
set timescale to 0 - freeze time. By setting your own value, you can control time by speeding it up or slowing it down.
sexchange - Change the sex of a character.
showracemenu - opens the character customization menu, where the player can change the character's race, gender, name, and appearance.
setlevel X - change character level by setting your own value.
setav invisibility 1 - NPCs do not see the player.
setav invisibility 0 - NPCs can see the player.
modav carryweight X - add a certain value to the carrying weight.
setav speedmult X - Adjusts the player's movement speed.
setscale X - change the character's height, where X: 1 - 100%, 2 -200%, etc.
setgs fJumpHeightMin 100 - setting the jump height.
setav Health X - change the maximum number of lives.
setav Magicka X - change the maximum amount of magicka.
setav Stamina X - change the maximum amount of stamina.
setav attackdamagemult X - change weapon damage.
setav leftweaponspeedmult X - Change the attack speed of a one-handed weapon.
setav weaponspeedmult X - change the attack speed of secondary and two-handed weapons.
setav LeftitemCharge X - charge the main weapon, the allowed value is no more than 3000.
setav RightitemCharge X - charge an additional or two-handed weapon, the allowed value is no more than 3000.
additem 0000000F X - add X gold coins.
additem 0000000A X - add X lockpicks.
placeatme 0010BF90 - Summon a spectral horse.
setcrimegold 0 - Remove the bounty on the character's head.
addspell 00092C48 - add the "Lycanthropy" skill to turn into a wolf/werewolf.
addspell 000B8780 - add the Sanguinare Vampiris skill to turn into a vampire.
moveto - move to an object or creature.
coc qasmoke - teleport to a location to test game mechanics.
coc riverwood - will move back from the test location to Riverwood (the location can be changed at will to any of the existing ones).
setpos [coordinates] [number] - moves the character along the coordinates specified by the player
getpos [coordinates] - the player can find out his coordinates (they will be displayed immediately after entering the code).
removeallitems - completely clears the inventory of items and useful loot.

Controlling other characters in the game

There is a list of commands that allows the user to take full control of any creature, be it an enemy or a friendly character. For the codes to work, everything must be done in the sequence described below:

Switch to third-person view (key "F" on the keyboard).
Standing in front of the living creature we need, open the console.
We click on the character with the mouse (this is easy to do, since the console is translucent and we can clearly see the objects around us).
Enter the TFC code.
Code Player.TC - allows you to control the main character.
TC code - allows you to fully control an NPC or creature.
Enter the TFC code.
We close the console.

After gaining the ability to control an NPC, the user will be able to move, but will not be able to attack them. If you press the attack button, then the main character will perform actions, and not the one you selected through the console. A way to attack while controlling NPCs has not yet been found and most likely it will not be possible to do this through the console.

Cheats for quests

IN Skyrim game a large number of additional quests and optional story missions. Some quest chains can take several days or even weeks to complete (depending on how much time the player spends in Skyrim). If you have already seen certain quests and you have no desire to complete them, or if the task is buggy and does not allow you to go further in the story, then you can use the codes and solve the problem.

SQT ShowQuestTargets - displays the ID-code of the selected quest in the console, which allows further manipulations with it.
SQS - displays all the stages of the quest.
GetStage - Shows the number of the quest the player is currently doing.
SetStage [stage] - starts the selected stage of the quest according to the entered ID-code.
MoveToQt - teleports to the quest marker (current task).

Moving to the quest objective:

We save the game and no longer overwrite this separate save until all stages of the quest are completed.
Use the J key to open the list of tasks. After we have chosen the quest we need, press Enter
Next, in the console window that opens, enter "ShowQuestTargets" and get the code for the required quest. They are placed in the console in exactly the same order as they appear in the job log.
After receiving the quest, we enter MoveToQt and the player is instantly transferred to the main goal of the selected quest.

Command "stop the fight with the NPC"

Before entering the command, you need to make sure that all the characters with whom the battle is currently taking place are in front of the screen. We proceed in the following sequence:

We turn on the console and select each enemy character in turn. Then we enter the corresponding codes for them.
SetCrimeGold 0 - disable the reward announced for our murder.
StopCombat - turn off the aggression of enemy NPCs towards the player

IMPORTANT! After entering the code that disables the issuance of a reward for the death of our hero, you can close the console. If one of the attackers was not registered in the console (his ID-code), then he will start attacking our character again. In a second, all the partners standing with him will also begin to attack. In order not to miss anyone, you should carefully look at the minimap.

All enemies are marked on it with red dots. This way we can click through all the enemies in front of you. Teams may not work on permanent enemies (those that are initially our enemies in the game), as well as some quest characters. They will always attack our GG.

Object Manipulation Codes

There are many items in Skyrim that somehow affect the character or are the goal of some kind of task. Sometimes there are bugs that change the characteristics of the item or simply do not allow you to receive a reward for the quest.

prid - select an object by its own code (you can recognize it through the console, just pointing at it with the cursor).
stopcombat - stop fighting an enemy NPC.
kill - kill the selected creature or character.
resurrect 1 - resurrect the GG or NPC.
resetai - clears all dialogs and interactions from the selected NPC, as if you had not spoken to him.
openactorcontainer 1 - open the inventory of the selected character.
removeallitems - Clear the inventory of the specified creature.
equipitem - add the required item to the selected character.
inv - open the inventory of the selected object.
duplicateallitems player - Copy all items from the inventory of the selected NPC to your backpack.
resetinventory - return the contents of the inventory to the standard content.
setownership - get ownership of a certain item (it will not be considered stolen).
unlock - open the lock.
disable - hide the required item.
enable - show an object hidden from the player.
markfordelete - Delete the selected item or NPC.

Cheats for partners and NPCs

In Skyrim, any character can be made your partner. They often give the player an advantage and bonuses. This is help in battle, and an additional backpack for carrying cargo, and help in the battle with dragons. To make any NPC your partner, you must enter the cheats in a certain sequence:

The player must stand near the selected character and open the console.
We click on the character and in the console and get the code.
SetRelationshipRank Player 3 - the character is sent to a group of NPCs who can become the player's partners.
AddFac 0005C84D 1 - add a partner dialogue for the NPC.
Close the console and continue the game.
We start talking with the character and an option will be available in the dialogues that will make him our partner.

List of cheats for a partner:

SetRelationshipRank Player 3 - sends the character to a group of partners.
AddFac 0005C84D 1 - Adds a Follow Me dialog to the selected NPC.
Set PlayerFollowerCount to 0 - After activating this code, which adds the appropriate items to the dialogue for taking NPCs as partners, you need to get rid of old satellites (if necessary). Even after entering the code and getting a new companion, the old companions continue to follow the player. If you do not have a satellite, then this command will not work. The maximum number of partners in the game is 1. Entering another value instead of 0 does not make sense, the cheat code simply will not work.
Set PlayerFollowerCount to [#] - set to zero and discard all followers that are currently following you.

Outcome

If you know how to open the console and enter cheats, then this article will be very useful for you. Console commands open up new opportunities for the player, which he can use as he wants. Increase the size of your squad, skip uninteresting quests and bypass any bugs encountered in the game.

14.11.2020

Thousand

The most interesting:

GTA San Andreas - how to skip any mission in the game?

GTA V cheat codes Code for removing stars in GTA 5

Cheat Codes GTA V Gta 5 Wanted Stars

Fast travel in skyrim code. Skyrim (Skyrim)

skyrim codes 1.2. The main characteristics of the hero

Codes in the game Skyrim 1.3. Character Skills

Codes in the game Skyrim1.4. Character Perks

Skirim codes 1.5. Increase damage from weapons, spells

Cheats from Skyrim 1.6. The screams of dragons

TES 5: Skyrim Cheats 1.7. Healing from diseases

2. Codes for getting items

TES V: Skyrim codes 2.1. Standard inventory management commands

skyrim 5 cheats 2.2. Codes for gold

The Elder Scrolls V codes 2.3. Armor sets (sets)

The Elder Scrolls 5 codes 2.4. Weapon sets

Cheats for the game Skyrim 2.5. Accessories

Cheats Skyrim 2.6. Consumables: Ingredients, Soul Stones, Potions, Arrows

Cheats from the game Skyrim 52.7. Treasure chests

Skyrim cheat codes 2.8. Enchanting (upgrading) weapons and armor

skyrim cheat codes2.9. Legendary weapons and armor

TES V: Skyrim codes 2.10. How to find the ID of an item

3. Codes for placing objects

Skyrim cheats and codes 3.1. Determining the object code

skyrim console commands3.2. Placement of objects

Cheats from Skyrim 3.3. Objects for home

4. Codes for fast travel

5. Codes for friendly characters (NPCs)

skyrim codes 5.1. Stop fight with NPC

Skyrim cheat codes5.2. NPC customization

Skyrim V codes 5.3. NPC control

Cheats in the game Skyrim 5.4. Companions NPCs

6. Codes for completing quests

View codes from Skyrim6.1. Quest Search

What are the codes in Skyrim6.2. Passage of the quest

7. Other codes

RPG Skyrim Cheats 7.1. Graphics and animation settings

skyrim codes 7.2. Game settings

8. Solving problems with entering codes

skyrim codes 8.1. Remove squares when entering cheat codes

Main list of cheat codes

Vampirism

Teleportation

How to find out the names of locations for the coc command

Companions (partners)

Strengthening skills

Remove squares when entering cheat codes

Set the English language in the console

Pumping all skills and perks

Armor sets (sets)

Weapon sets

Shouts DLC Dawnguard

Shouts DLC Dragonborn

Ingredients, Soul Stones, Potions, Arrows

Treasure chests

Passage of quests

How to find out the name of a quest by its ID

How to find the ID of an item

Housing

Main list of cheat codes

Vampirism

Teleportation

How to find out the names of locations for the coc command

Companions (partners)

Strengthening skills

Remove squares when entering cheat codes

Set the English language in the console

Pumping all skills and perks

Armor sets (sets)

Weapon sets

Shouts DLC Dawnguard

Shouts DLC Dragonborn

Ingredients, Soul Stones, Potions, Arrows

Treasure chests

Passage of quests

How to find out the name of a quest by its ID

How to find the ID of an item

Housing

Correct entry of cheat codes

Controlling other characters in the game

Cheats for quests

Command "stop the fight with the NPC"

Object Manipulation Codes

Cheats for partners and NPCs

skyrim codes
1.2. The main characteristics of the hero

Codes in the game Skyrim
1.3. Character Skills

Codes in the game Skyrim
1.4. Character Perks

Skirim codes
1.5. Increase damage from weapons, spells

Cheats from Skyrim
1.6. The screams of dragons

TES 5: Skyrim Cheats
1.7. Healing from diseases

TES V: Skyrim codes
2.1. Standard inventory management commands

skyrim 5 cheats
2.2. Codes for gold

The Elder Scrolls V codes
2.3. Armor sets (sets)

The Elder Scrolls 5 codes
2.4. Weapon sets

Cheats for the game Skyrim
2.5. Accessories

Cheats Skyrim
2.6. Consumables: Ingredients, Soul Stones, Potions, Arrows

Cheats from the game Skyrim 5
2.7. Treasure chests

Skyrim cheat codes
2.8. Enchanting (upgrading) weapons and armor

skyrim cheat codes
2.9. Legendary weapons and armor

TES V: Skyrim codes
2.10. How to find the ID of an item

Skyrim cheats and codes
3.1. Determining the object code

skyrim console commands
3.2. Placement of objects

Cheats from Skyrim
3.3. Objects for home

skyrim codes
5.1. Stop fight with NPC

Skyrim cheat codes
5.2. NPC customization

Skyrim V codes
5.3. NPC control

Cheats in the game Skyrim
5.4. Companions NPCs

View codes from Skyrim
6.1. Quest Search

What are the codes in Skyrim
6.2. Passage of the quest

RPG Skyrim Cheats
7.1. Graphics and animation settings

skyrim codes
7.2. Game settings

skyrim codes
8.1. Remove squares when entering cheat codes