How to disable the onscreen mode in games. How to start the game in the window mode: all methods

Window mode - best conspiracy. Why play the window mode? It is from him that it is easiest to switch to another window when the head, wife, parents or a cat, who is very against your pastime, suddenly entered the room. And seriously, this question may be relevant to the fans of old games. As a rule, such games have a very low resolution and when deployed to the whole screen look awful. In addition, the window mode is convenient to switch to other tabs, allowing you to instantly return to the game, without a long expectation of "loading" textures, locations and so on.

But how to start the game in the window mode? Fullscreen mode in some games can be disabled in the graphics settings of the game itself, with others you will need to apply a couple of tricks. In this article we will tell about all known ways.

In the game, press the ALT + ENTER buttons. This is a classic combination that triggers in a variety of full-screen applications and translates the game to the window mode.

Some games use other hotkeys that can be found from the control settings menu.

Using the property "-window.»

If the game does not respond to hotkeys - you should try to perform the following steps:

1. Save the changes and enter the game.

If it did not work, try instead of "-window" to introduce "-W".

With this property, the start of the game with this icon will be made in the window mode. To open the game to full ScreenYou will need to simply delete the inscribed condition.

Game settings

Some games support the transition to the window mode through the settings menu - it is only worth putting a tick in the graphic settings menu, and the game will open in the window.

Using third-party programs

The most common program for forced translation of the game in the window mode is Chinese D3DWindower, quite old, but working.

In order to play in the window with its help, you must:

1. Download the program, install it and run.
2. Press the "plus" and select a file with the game - it will appear in the program list.
3. Select the game and click on the closed folder icon - the settings window will open, where in the first tab it will be necessary:
   • set the desired width and height of the window - in the first two input fields, respectively;
   • make sure that the tick is right from them;
   • press the button on the right at the bottom of the window, then select from the folder with the D3DHOOK.DLL program;
   • save settings and click on the third right button in the main program menu.

If everything is done correctly, the program must open the game in the window mode.

Attention: in the way K. D3dwindower there should be no kirillic symbols!

Using an emulator

If this program does not help you, you can try to use system emulators, but this method is very demanding to computer resources and is not suitable.

In order to run the game via the system emulator, you can use Windows Virtual PC or VMware, which can be downloaded from the links from official sites. Such programs create the so-called virtual machine - "Computer on a computer" and usually work in the window mode, because any game running in this way will be located in the emulator program window. This method requires a long setting, and the virtual machine takes a rather much space on the hard disk, so we recommend using this method only if you work with it. Set the emulator only to start the game in the window mode - too much time and long.

However, if you still decided to try, then you will need the installation image of the OS, the best, Windows, since it is compatible with most games, the emulator distribution, time and patience. You will need to perform the following actions:

1. Install one of the above programs and run it.
2. Following the instructions, specify the program path to the image of the setting disk from the OS, set the amount of the virtual machine of the disk space (as a rule, for the correct operation of the emulator there is enough 20 GB of free space, but in our case everything will depend on the size of the game you want in it Run).
3. Wait for the installation of the OS, complete it, following the instructions of the installation program.
4. Reload the virtual machine.
5. Install on it game and all the necessary additional software (Visual C ++, DirectX, etc.).
6. Start and hope that your computer will have enough performance.

It is worth remembering that the game in the window mode, especially using third-party software (especially through the virtual machine), requires more resources, and therefore can slow down, hob and work incorrectly, especially if you play on a weak computer or parallel the large number of other programs.

Modern programs are usually automatically configured under the display resolution - however, lovers to play old action or arcade may arise how to make the game on the whole screen.

Because the application created 10, 15 or even 25 years ago, on the modern can only be displayed partially.

Sometimes such a question occurs at startup.

There are a number of reasons why this happens, as well as several ways to return everything to normal and play full-screen mode.

Method 1. Using hot keys

It is often enough to translate the game or any other application full screen can only be pressing 2 keys - "ALT" and "ENTER".

The method helps not only in old games, but also in modern - for example, in WOT.

The same keyboard shortcut, if necessary, return the window mode back.

Method 2. Changing the startup parameters

Sometimes it happens, especially if you play someone else's computer that the game is required to start the "-Window" parameter in the window of the label.

It can be recorded in the object "object" of the properties of the game label.

Removing this inscription, you can restore the standard launch to the entire monitor.

In this case, you should choose the "Compatibility" tab in the properties of the label or the application itself and select the operating system.

However, most often the OS list ends on Windows Vista, and the owner of the modern OS, for example, this method will not help.

Method 3. Adjusting the video card

In some cases, run games in full screen interfere with outdated video card drivers. The question is solved by their update or full reinstall.

The video card setup menu of each manufacturer looks different.

For example, for the company's products, the user will have to open in the Start / Control Panel menu.

Here the NVIDIA control panel is selected and choose the zoom adjustment there. When it is turned on, the game should expand to screen sizes.

For ATI video cards, the Catalyst Control Center application is required.

And for integrated Intel Graphics cards, often installed on, you will need to perform a number of actions described separately.

Method 4 4 game settings

Some games on the modern OS, for example, on allow you to install a full screen or window mode in your graphics settings.

This feature can be detected by running the game that for some reason runs in the window, that is, not on the entire screen.

Solution:

1. Go in settings;
2. Find the item responsible for starting in the window or full screen mode;
3. Enable mode or put a tick.

Sometimes after changing the settings, the game has to be restarted. It usually no matter what the operating system is nor the screen resolution.

Method 5. Change of permission

If all of the above did not help achieve the solution to the permission of the game in a normal state, perhaps the game is quite old in order to run on the entire screen.

Sometimes in this case the picture looks fetus.

And it is possible to fix the problem in just one way - change the resolution of your screen.

After that, other programs will stop starting to launch, more modern and calculated on normal parameters.

Therefore, playing into the game, you need to return the monitor the usual permission for it.

If the game requires the resolution of 640x480, and the monitor does not support it, there is one more option. It is selected in the label properties on the Compatibility tab.

Important! It is worth noting that this feature allows you to return the normal resolution after exiting the game automatically.

Solving the issue on a laptop

If the problem with the screen that opens is not all the height or width of the screen appears on the Windows laptop, it can be entered into the incorrectly set by the Intel Graphics intel graphics.

To eliminate it will be required:

1. Install software from the map manufacturer;
2. Open the graphics menu, appearing when you press the right mouse button on the empty desktop area;
3. Find a section "Display" and open its basic settings. It may not be absent if on the laptop and so the maximum resolution is set.

By reducing the resolution, you get the ability to change the screen settings.

By closing the Intel panel, you can run all the necessary applications that will now stretch to the entire area of \u200b\u200bthe display.

Sometimes the clarity of the original image may deteriorate.

Therefore, after the game it is worth disabled scaling and use it only for this particular program.

Let's summarize

Knowing how to open games and programs in full screen mode, you can noticeably simplify the work and game process. As a rule, all these methods require some actions.

And some of them allow, spending a little time immediately, no further worry about the games that are not open on the entire screen.

How to make the game on the whole screen? On a laptop

5 ways - how to make a game full screen

The computer is often used not only for work, but also for entertainment, including games. The game, like any application on the computer, can work in full screen mode or in the window version. Depending on the situation, it can be convenient to use one or another version of its display. Ways to start the game in the window mode, the set, and each of them has its advantages and disadvantages.

Note: Usually, the need to run the game in the window mode is associated with the desire to quickly switch between running programs on the computer. Also start the game in the window mode is useful, for example, if it is quite old and has a low resolution, which is why the picture is increasing to the full screen.

Using settings in the game

The easiest way to translate the game from a full-screen mode to the window version is to use the settings in the game itself. Most often, the switch between the window mode and the usual is in the "screen" or "graphics" options. However, not all games allow it to do.

Using hot keys

Windows users with experience perfectly know the hot key set, which are moving from one version of the system to another, allowing you to quickly perform all kinds of actions. There is a way in the system how to translate an application or game in the window mode. To do this, it is enough on the keyboard at the same time press the ALT + ENTER keys. After that, the full screen mode is changed to the window or vice versa.

Note: This key combination works in all versions.Windows, but not with all programs and games.

Using the "-Window" property for a shortcut

If neither one of the above methods does not respond to the game, or change the display mode is not possible in the settings, you can try the method with the option of the window mode in the shortcut. To do this, you need to find a shortcut from the game on the desktop and click on it with the right mouse button. In the drop-down menu, select "Properties". A new window will open in which you want to enter the parameter " - window." This property is prescribed in the Count "Object", as shown below for example.

When the required parameter is registered, click "OK" to save the changes made. After that, run the game through this shortcut, and it will open in the window mode.

Note: In some cases, the parameter "-window "does not work. We recommend trying the parameter "-w ", Save and try to start the game.

Using third-party applications

You can select two types of applications that allow you to run the program in the window mode - these are specialized utilities and emulators. Consider each of the options.

Utilities to start the game in the window mode

Auxiliary applications that allow you to run the game in the window mode, quite a lot. Consider a similar type of program on the example D3DWindower. This utility can be downloaded for free from the official site of developers. After downloading the program, do the following steps to open the game in the window mode:

After that, a window will open in which the required game will start.

Emulators to start the game in the window mode

Emulators are the most difficult way to be resorted in extreme cases. It implies complete emulation operating system Inside the window, followed by the necessary game in it. There are many similar emulators, both paid and free. Among the most famous options, you can select Windows Virtual PC and VMware.

Many users of personal computers and laptops face the challenge of the game in the window mode. If you have the same problem, you should not panic immediately. Though the problem is rather common, but it is corrected quite easily. To begin with, it will be not bad to update all the drivers, especially on the video card. You also need to properly configure the resolution of the screen itself. After all the updates and settings go back to the game and look at the result. Also very often in many games there is a problem in the most settings of the game. Always read carefully and set the game itself. Very often they can see such items as: run the game in full screen mode or start the game in the window mode. Look carefully if there is such an item, then put a tick in full screen and remove from the window. Also the simplest, but no less effective is the simple combination of the ALT + ENTER keys. It is this combination that allows many games to deploy to the entire screen.

What if nothing helped?

You need to do a certain job with your system. We offer to do it with two useful programs.

1. Updating drivers with Driver Booster. It is really cool software that often helps. Updating old drivers to new - one of the key requirements for the normal functioning of games and programs on the computer.

You may think that Windows always notifies users about the presence of new updates. So, it shows alerts, but only for the availability of updates for Windows and video card. But, besides this, there are still many drivers that need to be updated regularly.

2. PC repair with Reimage Repair. Run this program to analyze your system for errors (and they will be 100%). Then you will be asked to cure them, both individually and all at once.

Sometimes when working in a photoshop, a shortage of free space on the image processing screen can be a real problem for you, especially if you do not part of the lucky ones having a double-screen monitor. All sorts of tools, menu windows, parameters, panels that make up the program interface can strongly clog the screen and significantly limit the place available to work with the images. Add to this the constantly increasing image size as the digital technologies develop, and you will understand how important it becomes how it becomes how to increase the workspace on the screen to the maximum.

Fortunately, when working with Photoshop overcome the problem of lack of working space is fairly easy, due to the presence of various modes on-screen display. The on-screen display mode determines which part of the interface should be displayed on the screen, and varies from the standard mode, which displays the entire interface, until a full-screen mode, which shows only the image itself. In this lesson, we will consider in detail three screen display modes and methods of switching between them. I will also show you some useful key combinations for working with screen modes. I will use the version of Photoshop CS6, but this lesson is also suitable for the version of Photoshop CC.

Screen display modes

1. Standard Screen Mode (Standard Screen Mode)

Below is an image opened on the screen at the moment (a photo of a woman in a mask from photobank Shutterstock):

Standard Mode of Screen Display in Photoshop

This image is open with me in standard screen mode, installed program default. This mode displays the entire program interface, including the toolbar on the left, control panel on the right, the menu bar at the top, various parameters, scroll bar and other information about the document window. Insofar as standard mode The screen provides us with fast and easy access to all necessary elements, it also takes the largest area on the screen.

Perhaps now we can not see how the interface may make it difficult to work with the image, because at the moment I have the "Show full screen" parameter (Fit On Screen), which means placing the image on the screen so that it can be seen completely. To get a visual idea of \u200b\u200bthe benefits of various screen modes, I will press Ctrl + 1 / Command + 1 keys to quickly transition to 100% image scale (all about changing the image size in Photoshop You can read in our scaling basics and "Tips" And hotkeys for scaling ").

With a 100% scale, the snapshot is too big and completely placed on the screen. In this case, the display of the entire interface can be a problem for us, since the image viewing area is blocked by all sorts of panels, especially if we work on small monitors with a low resolution:

With an increase in the snapshot, the display of the entire interface can be an interference for us.

2. Full screen mode with the menu panel(Full Screen Mode with Menu Bar)

If you want to increase the size of the workspace, you can switch to the second of the three screen modes, which is called "full-screen mode with the menu panel". This can be done in several ways. First, you can choose the "View" section in the menu bar at the top of the screen, then the "screen mode" and "full screen mode with the menu panel" (View\u003e Screen Mode\u003e Full Screen Mode with Menu Bar):

Select "View\u003e Screen Mode\u003eFullscreen mode with the menu panel »

More fast way Switching between screen modes in Photoshop is to click on the display icon of the display mode of the display mode at the bottom of the toolbar and keep the icon pressed for a while, as a result of which a pop-up window appears with three screen modes. From the list that appears, you must select "Fullscreen Mode with the Menu Panel":

Click on the screen mode shift icon, holding the button, and select from the "Fullscreen Mode with the Menu panel" from the list

When you select a full-screen mode with the menu panel All interface elements that were part of the document itself become hidden: the document name is at the top, "Collapse" buttons, deploy "and" close ", scroll strips on the right and below, scale button and other information related to The document itself, usually located in the left lower area of \u200b\u200bthe window. Also, if you have several images in separate windows, only the selected document remains. In this case, all other interface elements (toolbar on the left, control panel on the right, the menu bar at the top) We continue to see on the screen:

Full screen mode with the menu panel Increases the size of the workspace, while maintaining the individual interface elements visible

3. Full screen display mode (Full Screen Mode)

In order to maximize the size of the workspace, switch to the third mode of the screen display, which is called simply "full-screen mode". You can choose it, or by clicking on the "View" section in the menu bar at the top of the screen, hereinafter - "Screen Mode" and "Full Screen Mode" (View\u003e Screen Mode\u003e Full Screen Mode), or simply clicking and holding the mode shift icon The screen at the bottom of the toolbar and selecting the "Fullscreen Mode" from the list appeared:

Click on the screen mode icon by holding the button, and select the "Fullscreen Mode" from the list

When you select a full-screen mode for the first time, a dialog box appears in the program, where it will be briefly described how this mode works. If you do not want to see this message every time you switch to full screen mode, check the checkbox in the "Don't Show Again" dialog box and then click on the "Fullscreen Mode" button:

The program warns you in advance that full-screen mode differs from the current mode currently

When a full-screen mode is selected, the entire interface becomes invisible, with the exception of the image itself, and the screen turns into the workspace:

It seems incredible, but the image is still open in the photoshop program. Fullscreen mode hides the entire interface.

Working with interface

1. Working with interface panels on the edges of the screen

Perhaps you will think: "All this, of course, is wonderful, but how should I work with an interface that is not visible?" On the one hand, you can always rely on the key combinations and use them, provided that you remember the desired combination on the keyboard. But in reality, you do not need to be a "outstanding user" to work with a full-screen mode. There is an easy way if necessary to make an interface visible. To temporarily return the toolbar and select the desired tool in full screen mode, simply move the mouse cursor to the left edge of the screen. Once you choose the desired tool, remove the mouse cursor from the edge and the toolbar will disappear:

In full screen mode To view the toolbar, move the mouse cursor to the left edge.

To view the panels that as usual mode Locked on the screen on the right, move the mouse cursor to the right edge of the screen. After working with the panels, remove the mouse cursor from the edge, and the panels will disappear:

In full screen mode To view the panels, move the mouse cursor to the right edge

2. Display and hide interface panels from keyboard

You can also temporarily hide and display panels by pressing certain key combinations, and this applies not only to the full screen mode. These key combinations operate in any of their three screen display modes and make it possible to increase the workspace if necessary. In any screen mode, press the tab key (Tab) to hide or display the toolbar on the left, the menu bar at the top and panel on the right. In my case, I pressed the key, being in full screen mode, but you can also try to apply the key and in standard mode, and in full screen mode with the menu panel:

Press the tab in full screen to display the toolbar, the menu bar and panels located on the right side of the screen.

In order to display and hide the panels, located only on the right side of the screen, press the SHIFT + TAB key combination. And again, I use this combination for a full-screen mode, but also this combination works in the other screen modes:

Click in full-screen key combinationSHIFT +.Tab to display panels located on the right

We looked at how you can switch between screen modes using the menu bar with the "View" section and the screen mode icon on the toolbar. But the fastest method of switching is pressing the F key on the keyboard. By pressing the F key several times, you will switch from the standard screen mode to full screen mode with the menu panel, then on the full screen mode and back to the standard one.

If you want to switch modes in the reverse order, press the SHIFT + F key combination. In conclusion, in full-screen mode, you can press the ESC key to exit the mode and return to the standard screen display mode (pressing the F key will result in the same result).

And so we did it! We looked at how you can clear the screen in Photoshop and increase the size of the workspace, using different screen modes and useful key combinations! To further explore the program, visit our section "Fundamentals Photoshop" or go to the lessons that you may interest!

Transfer: Ksenia Rudenko